Fox 35016 .35 C/L Ceramic Engine
This is the Fox .35 cu in (5.7cc)
Control Line Ceramic Cylinder Engine.
Features
-
Fox 35016 .35 C/L Ceramic
Engine
-
Ceramic plated aluminum
cylinder adds up to 20% more RPM, substantially reduces wear on piston and
sleeve and reduces cylinder weight by 35%
-
Suited for control line stunt
models up to 44 oz (1247g) in weight and wing spans from 36" - 52" (914mm -
1321mm) and also profile models such as the Ringmaster and Flight-Streak
type
-
Single needle control line
carburetor
Specifications
-
Displacement: .35 cu in
(5.7cc)
-
Bore: .800
-
Stroke: .700
-
RPM: 9600 with 10x6 propeller
-
Weight: 7.9oz (225g) with
muffler
-
Needle Setting: 5-7 turns out
with hole in spraybar pointing down
-
Distance Between Mounting Hole
Centers Same Side: 0.63" (16mm)
-
Distance Between Mounting
Holes Centers Opposite Side: 1.5" (37.5mm)
-
Height Bottom of Mounting
Tab/top of Cylinder Head: 2.4" (62mm)
-
Height from Crankcase Bottom
to top of Cylinder Head: 3" (76.5mm)
-
Width at Mounting Tabs: 1.8"
(46mm)
-
Distance from Backplate to
Front Bearing: 2" (51mm)
-
Distance from Backplate to end
of Crankshaft: 3.1" (79mm)
-
Distance Between Muffler
Mounting Holes: 1.4" (35mm)
Contents
Requirements
-
Fuel: Control line formula,
29% castor oil, 5% nitromethane and 66% methanol (manufacturer recommends
Fox Superfuel, not carried-engine will not run properly and usable life may
be reduced by using most commercial R/C fuels on the market)
-
Glow starter, plug wrench and
field equipment
|
|
