 Features:
GP780
-
Align GP780 Head Lock Gyro
Combo (GP780+DS650) HEG78005
-
Brand new intelligent control
logic providing dynamic gain adjustment by detecting current flying
conditions, allowing for consistent pirouetting rates during chaos or other
demanding 3D maneuvers.
-
Utilizes feed forward control
logic to boost rudder starting speed, and increase response sensitivity。
-
Utilizes Silicon Micro
Machines (SMM) sensor with excellet stability to dramatically reduce
in-flight tail drifts.
-
Utilizes AHTCS (Active
Helicopter Tail Control System) to compensate any drift caused by wind
direction and force, as well as unintended yaw induced by helicopter itself
during flight maneuvers.
-
Tailor made specifically for
use with high speed digital rudder servos. This gyro festures high
sensitivity and minimal reaction time, fully utilizing the potential of
modern high speed digital rudder servos.
-
Suitable for all sizes of
helicopters, from micro indoor to large 90 size glow helicopters.
-
Metallic dampening plate built
into bottom gyro casing, dramatically increasing anti-vibration and
anti-interference abilities.
-
Features 1520μs pulse wide and
760μs narrow pulse wide frame rate.
-
Digital/Analog servo
switchable.
-
Reverse switch.
-
Rudder servo travel limit
adjustment (ATV).
-
Mode switch for large/mini
helicopter.
-
Delay adjustment.
-
Gyro locking mode and gain can
be adjusted remotely from the transmitter.
1.Mini/Micro heli mode, suitable
for T-REX250/450(“STATUS” Red); Medium/large heli mode, suitable for
T-REX500/600/700(“STATUS" Green)
2.There are 3 kinds of 760μs narrow pulse wide servos on the market, including
Futaba S9251, S9256, BLS251.
Features:
DS650
-
Ultra-speed servo for instant
tail control reaction(0.048sec/60 deg).
-
12 Bits 4096 signal resolution
for smooth movements.
-
Ultra Performance Coreless
Motor with fast reaction and low current.
-
Hardened high strength
superalloy gears that increase the lifetime.
-
Aluminum alloy mid case
construction for instantaneous heat dissipation, maintaining servo’s high
efficiency.
-
Supports digital & analog
control signal.
-
Powerful and precise servo,
suitable for T-Rex 600/700 rudder use.
Specifications:
GP780
-
Operating Voltage: DC 4.5~7V
-
Current Consumption:<80mA @
4.8V
-
Angular Detection Speed:500
degrees/sec
-
Operating Humidity:0℃~65℃
-
RoHS certification.
-
Operating Humidity:0%~95%
-
Size:26x25x11mm
-
Weight:14g
Specifications:
DS650
-
Stall torque:4.0kg.cm(4.8V);
5.0kg.cm(6.0V)
-
Motion
speed:0.058sec/60°(4.8V); 0.048sec/60°(6.0V)
-
Rating voltage:DC 4.8-6V
-
Temperature range:-20°C~+60°C
-
Dimension:40.3x20.1x36mm
-
Weight:56g
-
1520μs standard band
|
|
