 Features
-
Align Intelligent
Multifunction Charger Combo RCC-6SX+RCE-6BA
-
Separate balancing and
charging ports eliminating charging amperage limit due to balancing wires’
gauge.
-
Dual mode balancer: Can be
used as stand alone balancer, or concurrently with a separate charger.
-
Automatically balance 2~6
cells li-poly packs.
-
Balancing voltage resolution
accurate to ±0.005V.
-
Individual cells’ balancing
status displayed through LEDs.
-
Overcharging prevention
circuitry with cutoff set at 4.26V/cell for additional safety, minimizing
potential damages to the cells.
-
Low voltage cutoff set at
3.3V/cell to prevent over discharging of cells.
NOTE:
Do not leave the charger is operating unattended as it may cause a fire.
Specifications
RCE-6BA Li-Po
Balancer:
-
Lithium polymer cell count:
2~6 cells in series configuration
-
Balancing activation voltage:
-
Automatic: >0.03V imbalance
-
Manual: >0.01V imbalance
-
Discharge current during
balancing: 350mA
-
Imbalance control voltage:
+/-0.005V
-
Maximum cell voltage cut off:
4.26V
-
Low voltage cut off: 3.3V
-
Balancing voltage resolution:
+/-0.005V
-
Size: 83x45x19mm
-
Weight: 120g
Precaution:
-
Note!
If the battery becomes hot while high current discharging or flying, please
do not charge the battery immediately. Wait to cool down (about 20 mins),
then inspect to recharge. If against follow the original factory using
rules, possibly cause the battery to inflate or any dangerous accident
happens.
|
|
