Brand new redesigned 3GX
represents a new generation of multi function flybarless system. The
dramatically improved performance will create immediate impact on any
3GX is currently the smallest
and lightest flybarless system on the market. Two ports to directly connect
Spektrum and JR satellite receivers, along with full support of Futaba's
Based on the 3G FL760 manual
setup process, the 3GX can be setup in a few minutes through a simple
process. In addition, the 3GX can support all of the CCPM swashplate system
currently on the market including 90, 120, 135, and 140 degrees swashplates.
instruction on the computer setup software directs the user through a step
by step setup process, allowing for quick setups without omitting any steps.
connectivity. With the soon to be released Bluetooth connectivity kit, 3GX
can be programmed wirelessly from a PC. Eventually there will also be
smartphone apps allowing live adjustments to 3GX without powering down.
With 3GX's built in Align
RCE-G600 governor function, no external governor is needed to reduce
electronic wire clutters.
A library of pre-configured
3GX settings specifically available for T-Rex series of helicopters,
allowing pilots to achieve the most optimal setup for their helicopters.
Three levels of flight mode is
available on the 3GX to provide different feels from beginners to advanced
Custom parameters have been
opened up in 3GX to allow pilots to fine tune numerous settings for
swashplate and rudder. Settings export feature allows custom settings to be
shared amongst friends.
3GX utilizes brand new
gyroscope sensors of the highest specifications when compared to other
flybarless systems currently on the market, allowing it to be used under
harsh conditions. Dual axis plus rudder sensor dramatically improves
swashplate and rudder correction precision compared to last generation 3G.
This is clearly noticeable in stable hover as well as highly aerobatic
Suitable for helicopter of all
class from 200 to 700, glow engine or electric powered. The superior
vibration resistant characteristic is evident even when mounted with harder
double sided mounting tape.
3GX utilizes 16 bit processor
which is 4 times faster than previous generation, along with a completely
re-written firmware. The result is a dramatic stability improvement from
previous generation, with stability that rivals a flybarred helicopter, yet
posses explosive agility.
With built in pirouette
compensation function, 3GX is able to stabilize the helicopter on a fixed
point during pirouetting maneuvers. Pirouetting flips type of maneuvers are
easily accomplished with precision.
3GX's rudder control is
similar to the high end GP-780 gyro in that rudder sensitivity is catered
specifically for the helicopter's rudder response characteristics, allowing
consistent rudder feel even under high speed conditions. This excellent
control feel will allow pilot of all skill levels to experience the perfect
integration between 3GX and helicopter.
Additional peripherals planned
for the 3GX includes 3-axis accelerometer, 3-axis magnetic compass, and GPS
positioning system. While the commonly available position hold gyro system
utilizes only 6 sensors, 3GX’s total of 10 sensors ensure positioning of
helicopter with superior accuracy, providing the ultimate solution for
aerial photography or other special purposes.
T-REX 550E V2:
Newly designed aerodynamically
efficient metal main blade control system, with high rigidity and superior
New lightweight high precision
main gear, with excellent balance and stability.
The most optimal motor pinion
ratio and tail gear ratio to achieve the most efficient power output and
flight characteristic .
New lightweight rigid metal
main shaft bearing blocks.
Integrated swash anti-rotation
guide and gyro mounting platform.
Brand new CNC machined metal
tail gear box, with thicker side plates to increase rigidity. The more
streamlined design also allows for simpler disassembly.
Dual section battery mount for
optimal CG position based on battery weight.
3K carbon fiber side frame and
base plate, simple yet highly rigid for ease of maintenance.
High quality 5mm carbon rod
and CNC metal tail scissor control arms are used in rudder control system to
improve rudder lockingand control effectiveness.
Newly designed rear mounted
rudder servo mount, for pleasing aesthetic as well as improving side frame
strength and protection to the rudder servo.
High speed rated thrust
bearings in tail blade grips.
High efficiency torque tube
Additional radial bearing is
added to the one way bearing block to ensure smooth rotation, and eliminate
jammed one way bearing.
High strength carbon fiber
used on tail fins and tail boom supports.
New lightweight landing gears.
High grade airbrushed
Users must have a certain concept of security to
operate the R/C helicopters.
Be sure to read and comply with related safety notes of instruction manual
Specifications(3GX Programmable Flybarless System)
X and Y axis Operating Angle
Z axis Operating Angle
Size:36.5x25.2x15.6 mm Size
Supports Wide/Narrow Bandwidth
Digital and brushless servos
Spektrum and JR Satellite
antennas support (Replaces original factory receiver)
Futaba S.BUS system support
Built in governor function
Maximum working voltage:8.5V
Compatible with 1024/2048
resolution Spektrum receivers
Supports 90/120/135/140 CCPM
Field setup without the use of
Compatible with 2 to 5 blades
Support up to 6 servos
Automatic servo type
Specifications(T-REX 550E V2)
Main Blade Length: 520mm
Main Rotor Diameter: 1188mm
Tail Rotor Diameter: 254mm
Motor Drive Gear:16T
Main Drive Gear:170T
Autorotation Tail Drive Gear:
Tail Drive Gear: 34T
Drive Gear Ratio: 1:10.62:3.85
Weight (With Motor): 1800g
Flying Weight: Approx. 2800g
Align T-REX 550E V2 3GX Kits
Aluminum Tail Boom X1
RCE-BL70G Brushless ESC x1
520 Carbon fiber blades X1
DS610 Digital servoX3 set
DS620 Digital servo X1
3GX Flybarless System X1 set
600MX Brushless Motor X1
90mm 3K Carbon Fiber Tail
Blades X1 Set
Provided by user's power