Associated Factory Team RC10GT2 Kit Non-Pull Start 7080
This is the 1/10 scale glow powered, radio controlled,
Associated Factory Team RC10GT2 Off-Road Truck Kit.
Contains the following Factory Team Hop-ups;
Finned Engine Mount
PTFE-coated Threaded Shock Bodies with Collars
Unobtainium Coated Shock Shaft
Blue Aluminum Shock Bushings, Bulkhead, Hinge Pin Brace, Chassis Brace
Black Hard Anodized 6061-T6 Aluminum Chassis
CVA Joint with Quick Change Hubs
4 Steering Ball Bearings
Blue Titanium Turnbuckles
Blue Aluminum Rod-End Pivot Balls
Polished Blue Anodized Tuned Pipe
Blue Aluminum Servo Mounts and Flywheel
Light Outdrives
Features
-
Associated Factory Team RC10GT2 Kit Non-Pull Start 7080
-
Chassis: Anodized 6061
aluminum with molded front kickup and modular radio tray, dual deck layout,
blue aluminum front bulkhead
-
Drive: Rear wheel drive
-
Drive Shafts: Dogbones
-
Exhaust: Blue anodized tuned
muffler - ASCG1774
-
Fuel Tank: 2.8oz (82cc) flip
top cap - ASCC7899
-
Clutch: Large diameter 2-shoe
for SG type crankshafts
-
Transmission: Single-speed,
4.09:1 ratio
-
Ball Bearings: Full set
shielded type
-
Shocks: Four oil-filled, with
coil-over springs, PTFE coated
-
Main Gear: 54 tooth - ASCC7955
-
Receiver Box: Sealed -
ASCC7896
-
Differential: Ball diff
-
Brakes: Free floating disc
-
Tires: Front Proline Edge M3
2.2" diameter 2" wide - PROC8097
-
Tires: Rear Proline Bowtie M3
2.2" diameter 2.0" wide - ASCC7879
-
Wheels: 2.2" diameter, 2" wide
- ASCC7846 front - ASCC7980 rear with Posi-Lock quick change rear wheel
system with five-lug self- aligning design for fast pit stops without having
to worry about lining up the wheel onto a hex or drive pin. Posi-lock quick
change system is lightweight for reduced unsprung weight and rotating mass
-
Body: Clear untrimmed
Associated Interceptor Truggy - ASCC7992
-
Caster: Adjustable,
caster/toe-in refers to the angle of the front suspension when viewed
from the side of the car in relation to the chassis
-
Camber: Adjustable, camber
refers to the angle of the tops of the tires from vertical when viewed from
front or behind vehicle
-
Steering: Dual ball bearing,
dual bell-crank with adjustable servo saver, heavy duty steering blocks
-
Turnbuckles: Factory Team,
blue anodized titanium
Specifications
-
Vehicle:
-
Length: 16.5" (420mm)
-
Width: 13" (330mm)
-
Height: 6" (152mm)
-
Weight: 4.1 lbs (1850g)
-
Wheelbase: 11.2" (285mm)
adjustable
-
Tread- Front- 11" (280mm)
Rear- 10-7/16" (276mm)
-
Front Track: 12.75" (325mm)
-
Rear Track: 12.5" (320mm)
-
Ground Clearance: 1.5" (37mm)
-
Gear Ratio: 4.09:1
-
Tires- Front: 2.2" x 2"
-
Rear: 2.2" x 2"
-
Body-
-
Length: 17" (431mm)
-
Width: 6.5" (165mm)
-
Height: 4.25" (108mm)
Contents
-
Associated Factory Team RC10GT2 Off-Road Truck Kit with oil-filled
shocks, tires, wheels, body, decals, 20 tooth bell, 54 tooth spur,
hardware and illustrated building instructions.
Requirements
-
Radio: 2-channel with 2
standard servos
-
Transmitter Batteries: Eight
AA size
-
Receiver Battery: 5-Cell Hump
Pack - DTXM2010
-
Engine: .12-.15 cu in (2.0
-2.4 cc) non pull start with SG (pilot) style crankshaft and rotary
carburetor (standard crankshafts will fit using #2312 (ASCC4312) optional
Clutch Nut)
-
Glow Starter: 1.2 volt
-
Paint: Polycarbonate safe for
body
-
Misc. Items: Fuel bottle,
building and track equipment
-
Fuel: 2-cycle glow fuel with
10%-15% nitromethane, 16% lubricant
-
Miscellaneous building and
field equipment
|
|
