-
Displacement: .28cu in (4.6cc)
-
Specs such as Bore, Stroke and
Horsepower not provided by manufacturer
-
Distance between Mounting Hole
Centers Same Side: 0.83" (21mm)
-
Distance between Mounting
Holes Opposite Side: 1.5" (37.5mm)
-
Width at Mounting Tabs: 1.8"
(45.5mm)
-
Width below Mounting Tabs:
1.3" (31.2mm)
-
Height/bottom of Mounting Tabs
to top of Cylinder Head: 3.7" (94.5mm)
-
Height/bottom of Crankcase to
top of Cylinder Head: 4.2" (106mm)
-
Distance from Backplate to
Front Bearing: 2.9" (74mm)
-
Distance from Backplate to End
of Crankshaft: 4.1" (104mm)
-
Carburetor Settings;
-
High Speed Needle: Turn
clockwise until it bottoms out, then turn counterclockwise 2-3/4 turns
-
Low Speed Needle: Turn
clockwise until it bottoms out, then turn counnterclockwise 6-1/4 turns
-
Idle Speed Screw: Turn until
opening inside throttle valve is .030" (0.7mm)
