Associated 7029 SC10 RTR Team Associated/RC10.COM

This is the electric powered, radio controlled, 1/10 scale, ready to run SC10 Short Course Race Truck with the SC10 Team AE Body Trim from Associated.

Features

• Associated 7029 SC10 RTR Team Associated/RC10.COM

• Chassis: Molded composite low CG design with side nerf bars, hinged battery hold down strap fits NiMH and LiPo battery packs

• Drive: Rear wheel with steel rear dogbone drive shafts

• Motor: Associated Reedy Radon 17 turn

• Radio: Associated XP2 2-channel pistol grip with metal gear steering servo, transmitter does not have charge jack

• ESC: Associated XP SC200 forward/reverse with LiPo low voltage cut- off and reverse lockout

• Shocks: Oil-filled with blue aluminum bodies

• Body: 0.040" (1mm) thick painted and trimmed with SC10 Team AE trim

• Differential: Sealed, planetary gear

• Spur Gear: 87 tooth

• Slipper Clutch: Dual sided, externally adjustable

• Wheels: KMC style, 3" (76mm) diameter, 1.6" (41mm) wide, black in color

• Tires: Multi terrain scale with reinforced sidewalls, 4.25" (108mm) diameter, 1.7" (43mm) wide

• Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis

• Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle

• Bumpers: Front and rear with functional rear rubber mud flaps

• Ball Bearings: 14 rubber sealed

• Suspension: Fully adjustable with steel turnbuckles

• Steering: Angled bellcrank "coplanar" steering with integral servo saver

Specifications

• Vehicle-

• Length: 21.6" (550mm)

• Width: 11.5" (293mm)

• Track: 9.6" (245mm)

• Weight: 4.6lbs (2080g)

• Wheelbase: 12.9" (327mm)

• Internal Gear Ratio: 2.6:1

• Body-

• Length 21.6" (550mm)

• Width 11.5" (293mm) at front fenders, widest point

• 8.8" (224mm) at center section, narrowest point

• Height: 6" (153mm)

Package Contents

• SC10 Short Course Race Truck Kit from Associated with tires, wheels, painted body, motor, radio and instruction manual

Requirements

• Battery: 6-7 cell NiMH stick pack or 2-3 cell LiPo pack

• Battery Charger: Peak detection type recommended

• Transmitter Batteries: Eight AA-size

• Building and track equipment

Comments

• For Replacement Ball Bearings use:

• Qty. Size Location Qty. Bearing Set

• 2 6x10mm Transmission 1 DTXC1561

• 2 3/16 x 3/8" Transmission 1 DTXC1423

• 2 3/16 x 3/8" Idler Gear 1 DTXC1423

• 4 3/16 x 3/8" Rear Hubs 2 DTXC1423

• 4 3/16 x 3/8" Front Hubs 2 DTXC1423

• The Associated SC10 is also available in kit form with unpainted body, ASCC7027.