Associated 7032 SC10 RTR Ready Lift/RC10.COM
This is the electric powered, radio controlled, 1/10 scale, ready to run
SC10 Short Course Race Truck with the Ready Lift Body Trim from Associated.
Features
-
Associated 7032 SC10 RTR Ready Lift/RC10.COM
-
Chassis: Molded composite low
CG design with side nerf bars, hinged battery hold down strap fits NiMH and
LiPo battery packs
-
Drive: Rear wheel with steel
rear dogbone drive shafts
-
Motor: Associated Reedy Radon
17 turn
-
Radio: Associated XP2
2-channel pistol grip with metal gear steering servo, transmitter does not
have charge jack
-
ESC: Associated XP SC200
forward/reverse with LiPo low voltage cut- off and reverse lockout
-
Shocks: Oil-filled with blue
aluminum bodies
-
Body: 0.040" (1mm) thick
painted and trimmed with Ready Lift trim
-
Differential: Sealed,
planetary gear
-
Spur Gear: 87 tooth
-
Slipper Clutch: Dual sided,
externally adjustable
-
Wheels: KMC style, 3" (76mm)
diameter, 1.6" (41mm) wide, black in color
-
Tires: Multi terrain scale
with reinforced sidewalls, 4.25" (108mm) diameter, 1.7" (43mm) wide
-
Caster: Adjustable,
caster/toe-in refers to the angle of the front suspension when viewed from
the side of the car in relation to the chassis
-
Camber: Adjustable, camber
refers to the angle of the tops of the tires from vertical when viewed from
front or behind vehicle
-
Bumpers: Front and rear with
functional rear rubber mud flaps
-
Ball Bearings: 14 rubber
sealed
-
Suspension: Fully adjustable
with steel turnbuckles
-
Steering: Angled bellcrank
"coplanar" steering with integral servo saver
Specifications
-
Vehicle-
-
Length: 21.6" (550mm)
-
Width: 11.5" (293mm)
-
Track: 9.6" (245mm)
-
Weight: 4.6lbs (2080g)
-
Wheelbase: 12.9" (327mm)
-
Internal Gear Ratio: 2.6:1
-
Body-
-
Length 21.6" (550mm)
-
Width 11.5" (293mm) at front
fenders, widest point
-
8.8" (224mm) at center
section, narrowest point
-
Height: 6" (153mm)
Package Contents
-
SC10 Short Course Race Truck Kit from Associated with tires, wheels,
painted body, motor, radio and instruction manual
Requirements
-
Battery: 6-7 cell NiMH stick
pack or 2-3 cell LiPo pack
-
Battery Charger: Peak
detection type recommended
-
Transmitter Batteries: Eight
AA-size
-
Building and track equipment
Comments
-
For Replacement Ball Bearings
use:
-
Qty. Size Location Qty.
Bearing Set
-
2 6x10mm Transmission 1
DTXC1561
-
2 3/16 x 3/8" Transmission 1
DTXC1423
-
2 3/16 x 3/8" Idler Gear 1
DTXC1423
-
4 3/16 x 3/8" Rear Hubs 2
DTXC1423
-
4 3/16 x 3/8" Front Hubs 2
DTXC1423
-
The Associated SC10 is also
available in kit form with unpainted body, ASCC7027.
|
|
