Associated 7037 RC10T4 RTR 2.4GHz Brushless

This is the brushless electric powered, radio controlled, ready to run Team Associated RC10T4.1 off-road Racing Truck.

Additional Technical Info Will Be Added When It Becomes Available.

Features

• Associated 7037 RC10T4 RTR 2.4GHz Brushless

• Chassis: Molded composite, low center of gravity

• Drive: Rear wheel, with steel dog bones (not CVDs)

• Differential: Sealed, planetary gear

• Transmission: 2.6:1 laydown Stealth type, high-torque capacity

• Bearings: Full set, rubber sealed

• Shocks: Oil-filled blue anodized aluminum (silver springs on front and green springs on the rear)

• Radio: Team Associated XP3-SS 2.4GHz 3-channel with SHV1504 metal gear steering servo

• Speed Control: XP SC450-BL brushless with LiPo cutoff, forward and reverse with reverse lockout

• Motor: Reedy 3300kV brushless motor

• Front Tires: Associated racing compound ribbed

• Rear Tires: Associated racing compound bow-tie style

• Wheels: White (dyeable) dish style 2.2" (56mm) diameter

• Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis

• Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle

• Steering: Angled coplanar design to minimize bump steer and maintain constant steering angles throughout the range of suspension travel,built-in servo saver

• Body: Painted Interceptor-T with rear wing

• Slipper Clutch: High-torque capacity double-sided provides finer adjustment

• Impact-resistant rear motor guard

• Adjustable battery position

Specifications

• Length: 15.3" (390mm)

• Width: 12.4" (316mm)

• Track: 10.6" (270mm)

• Weight: 3.9lbs (1756g)

• Wheelbase: 11.3" (288mm)

• Ground Clearance:

• Gear Ratio: 2.6:1

Contents

• Pre-assembled Team Associated RC10T4.1 truck with brushless motor,2.4GHz radio, metal gear steering servo, painted body, brushless ESC and manual

Requirements

• AA Batteries: Eight for transmitter

• Battery: 6-cell stick

• Battery Charger: Peak type for selected battery

• Building and track equipment

Comments

• If bearings are needed use:
  Two DTXC1423 3/8 x 3/16 four needed, front wheels
  Two DTXC1423 3/8 x 3/16 four needed, rear hub carriers
  Two DTXC1423 3/8 x 3/16 four needed, transmission-top & middle
  One DTXC1411 5/32 x 5/16 two needed, diff outdrives
  One DTXC1437 3/8 x 5/8 two needed, ball diff