Associated 9039 RC10B4 RTR 2.4GHz Brushless

This is the 1/10 scale, radio controlled, electric powered, ready to run RC10B4.1 Off-Road Buggy from Associated.

Features

• Associated 9039 RC10B4 RTR 2.4GHz Brushless

• Chassis: Molded composite, low CG

• Drive: Rear wheel

• Motor: Reedy 3300kV brushless

• Radio: 2.4GHz XP3-SS 3-channel with SHV1504 metal gear steering servo and brushless ESC with brake and reverse

• Electronic Speed Control: XP SC450-BL with forward and reverse, reverse lockout and LiPo cutoff, Deans Ultra plug battery connector

• Differential: Sealed planetary gear, 2.6:1 ratio

• Slipper Clutch: Dual sided, adjustable

• Spur Gear: Composite construction 81 tooth, 48 pitch

• Shocks: Blue aluminum body, fluid filled with molded pre-load clips

• Battery Holder: Strap with twist-lock thumb knobs

• Ball Bearings: Rubber sealed in gearbox

• Body: Painted Interceptor buggy 2.0 polycarbonate

• Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis

• Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle

• Wheels: White dish style Front, 0.87" (22mm) wide, 2.2" (56mm) dia. ; Rear, 1.4" (37mm) wide, 2.2" (56mm) dia.

• Tires: Front, 1.1" (28mm) wide, 3.2" (81mm) dia. ; Rear, 1.7" (44mm) wide, 3.2" (81mm) dia.

• Steering: Angled bellcrank "co-planar" with servo saver

Specifications

• Vehicle-
  Length: 14.8" (377mm)
  Width: 9.8" (250mm)
  Height: 5.5" (140mm) measured at rear wing
  Wheelbase: 10.7" (273mm)
  Weight: 3.4lbs (1530g)
  Internal Gear Ratio: 2.6:1

• Body-
  Length: 11" (279mm)
  Width: 6.3" (160mm) at widest point
  Height: 2.5" (64mm)

Contents

• Assembled RC10B4.1 Off-Road Buggy with brushless motor, 2.4GHz radio, ESC, painted body, decals and instructions

Requirements

• AA Batteries: 8 for transmitter

• Battery: NiMH or LiPo

• Battery Charger: For selected battery type

• Building and track equipment

Comments

• The RC10B4.1 Brushless Powered Off-Road Buggy is available in the
  following color schemes;
  Blue/White, ASCD39BW
  Gray/White, ASCD39EW

• For Replacement Ball Bearings use:
  Qty.        Size               Location          Qty.       Bearing Set
  2          3/16x3/8"      Transmission       1           DTXC1423
  2          10x16mm      Transmission       1           ASCC9832
  2          3/16x3/8"      Idler Gear           1           DTXC1423
  4          3/16x3/8"      Rear Hubs           2           DTXC1423
  4          3/16x3/8"      Front Hubs          2            DTXC1423