Associated AE 8.0 Engine 25480

This is the Associated Pro 8.0 Nitro Racing Engine.

Features

• Associated AE 8.0 Engine 25480

• Direct replacement engine for the Associated Monster GT 8.0 Monster Truck, ASCC0392

• Pro-Start backplate pre-installed

• Aluminum body slide valve carburetor

• SG (pilot) type crankshaft

• Ten fin anodized aluminum heatsink head

Specifications

• Displacement: .50 cu in (8.0cc)

• Specs such as horsepower, bore and stroke were not provided by manufacturer

• Carburetor Settings-

• High Speed Mixture: Three turns counter clockwise from closed

• Low Speed Mixture: Five and one half turns counterclockwise from closed

• Idle Speed: Turn screw until throttle opening inside throttle valve is .050" (1.3mm)

• Weight: 14.5oz (410g)

• Distance Between Mounting Hole Centers Same Side: 0.67" (17mm)

• Distance Between Mounting Hole Centers Opposite Side: 1.6" (42mm)

• Height from Mounting Tab Bottom to Top of Cylinder Head: 3.9" (100mm)

• Height from Crankcase Bottom to Top of Cylinder Head: 4.6" (116mm)

• Length from Backplate to Front Bearing: 3.3" (83mm)

• Length from Backplate to Crankshaft End: 0.63" (116mm)

• Width at Mounting Tabs: 2.0" (50mm)

• Cylinder Head Diameter: 2.2" (56mm)

Contents

• Associated Pro 8.0 Nitro Racing Engine with Pro-Start Backplate, Slide Valve Carburetor and instruction sheet

Requirements

• Fuel: Car Blend, 15-30% ODOP3320

• Glow Plug: Medium/cold for 1/8 scale applications, ODOG0099

• Air filter kit: ASCC5730