Associated LRP Z.28R Spec 3 w/Pull Start LRP32802
This is the Associated LRP Z.28R Spec 3 Engine with Pull-Starter.
For use with 1/8 scale off-road buggies and monster trucks
such as the Associated MGT, ASCC0389.
Features
-
Associated LRP Z.28R Spec 3 w/Pull Start LRP32802
-
Slide Valve Carburetor, 8.5mm
venturi with ball link on throttle
-
ABC piston and sleeve
construction, (Aluminum piston with a Brass sleeve that is Chrome plated)
-
SG (pilot) type crankshaft,
13mm from tip to threaded area
-
Fork shaped aluminum
connecting rod with double bushings
-
Black anodized crankcase with
Blue anodized 10-fin cooling head
-
Rear exhaust
-
Ninety day limited warranty
Specifications
-
Power Output: 3.81 PS
depending on fuel type, manifold and tubing
-
Useable RPM Range:
2,000-33,0000
-
Engine Size: .28 cu in
(4.58cc)
-
Bore: .73" (18.5mm)
-
Stroke: .63" (17mm)
-
Number of Ports: 6+1 (6
intake, 1 exhaust)
-
Weight: 15.9 oz (450g)
-
Distance Between Mounting
Holes Same Side: .83" (21.2mm)
-
Distance Between Mounting
Holes Opposite Side: 1.45" (37mm)
-
Height from Bottom of
Crankcase/Top of Cylinder Head: 4.5" (115mm)
-
Height from Bottom Mounting
Ears/Top of Cylinder Head: 3.7" (93.5mm)
-
Width at Mounting Ears: 1.7"
(43.5mm)
-
Length from Back of Pull
Starter to End of Crankshaft: 4.5" (115mm)
-
Length from Center of
Crankcase to End of Crankshaft: 3" (76mm)
Contents
-
Associated LRP Z.28R Spec 3
Engine with Pull-Starter, glow plug, tapered collet, Slide Valve Carburetor,
instruction sheet
Requirements
-
Fuel: 25% nitromethane car
blend, do not exceed 30% nitro content
-
Air Filter: Foam type with
14mm-15mm base to fit carburetor
-
Exhaust System: Size and type
depends upon vehicle
-
Associated makes an adapter
(ASCG3340) allowing the HPI Roto Start (HPIP7126) to be used on this engine.
|
|
