Associated LRP32810 ZR.30 Spec.2 Pull Start
This is the LRP ZR.30 Spec. 2 Monster Truck Engine with Pull Starter.
Features
-
Associated LRP32810 ZR.30 Spec.2 Pull Start
-
LRP XTEC crankcase constructed
of T6 aluminum, black in color
-
Aluminum body slide valve LRP
XTEC carburetor with 9mm venturi SG (pilot) type 14.0mm/10.0mm bore triple
turbo scoop crankshaft
-
Lightened piston constructed
of high silicium alloy
-
ABC cylinder liner
construction "A"lloy piston with "B"rass cylinder liner that is "C"hrome
plated
-
Extra strong aluminum
knife-edge shaped connecting rod with double bushings
-
Ninety day limited warranty
(non-European countries only)
Specifications
-
Displacement: .30 cu in
(4.92cc)
-
Exhaust: Rear, round
-
Bore: 19.20mm
-
Stroke: 17.00mm
-
Number of Ports: 5+1 (5x
transfer, 1x exhaust port)
-
Power Output: 4.12 PS*
-
Max RPM: 33,200*
-
Weight: 15.2oz (430g)
-
Distance Between Mounting
Holes Same Side: 0.87" (22mm)
-
Distance Between Mounting
Holes Opposite Side: 1.5" (37.5mm)
-
Height/Bottom of Mounting
Tab/Top of Cylinder Head: 3.8" (97.5mm)
-
Distance from Pull Starter to
Front Bearing: 3.4" (85.5mm)
-
Distance from Pull Starter to
End of Crankshaft: 4.6" (116mm)
-
Width at Mounting Tabs: 1.7"
(43.5mm)
-
Width Below Mounting Tabs:
1.2" (31.2mm)
-
Diameter of Exhaust Outlet:
0.75" (19mm) including gasket
-
Carburetor Settings: Mid
Range, 2.25 turns from closed
-
Main, 2.75 turns from closed
-
*Power Output and Max RPM may
vary depending on fuel, exhaust system and tuning
Package Contents
-
LRP ZR.30 Spec. 2 Monster Truck Engine with Pull Starter, standard
glow plug, tapered cone, parts list, decals, exhaust gasket and
instructions
Requirements
-
Fuel with 25% nitro content,
2-stroke model car fuel
-
Exhaust system depending on
application, Associated Factory Team Muffler (ASCC6672) and Header
(ASCC6676) recommended
-
Air filter, plug wrench and
track equipment
Comments
|
|
