Axial AX90017 XR10 1/10 4WD Rock Crawler Comp Kit

This is the electric powered, radio controlled, 1/10 scale XR10 Motor-on-Axle Competition Rock Crawler Kit from Axial.

Features

• Axial AX90017 XR10 1/10 4WD Rock Crawler Comp Kit

• Chassis: Aluminum plates with composite plastic skid plate, chassis has multiple upper link adjustment holes for suspension tuning and anti-squat adjustments, removable electronics tray and multiple

• ESC mounting plates, streamlined skid plate for less hangups over rough terrain

• Drive: Four wheel with oversize 12.5mm steel universals, plastic lightweight axles with 16mm narrower rear axle to squeeze through tight gate layouts, low profile axle housing for maximum ground clearance

• Ball Bearings: Full set

• Pinion Gears: 14 tooth 48 pitch, 12-19 tooth pinion gears can be used for gear ratios from 44.2:1 through 27.9:1

• Gearboxes: Compact profile with ball bearing equipped sintered metal drivetrain

• Differentials: Locked (spool)

• Body: Clear Axial Hardline, meets all U.S.R.C.C.A. requirements, adjustablebody mounts for different body angles and heights

• Wheels: Axial 2.2 competition beadlocks with narrow offset for greater steering response, also includes CNC orange anodized rings

• Steering: Behind the Axle (BTA) design, enclosed steering slide with 8° kingpin angle for decreased scrub radius and tighter turns, front steering axle can rotate the motor up or down

• Suspension: 4-link double triangulated with composite plastic upper links and oversize rod ends with 7mm aluminum links and replaceable composite plastic sleeves

• Shocks: 72-103mm aluminum bodies, 10mm Delrin pistons with adjustable upper mounts for fine tuning ride height

• Caster: Adjustable in 15° increments, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis

• Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle

• Warranty: Your Axial product is warranted to be free from defects in materials and workmanship when new. This warranty does not cover damages due to normal wear and tear, user's failure to perform routine maintenance, user error of assembly or installation, user modifications or addition of aftermarket parts or option parts.

Specifications

•   Vehicle,

• Width: Front wheel to wheel outside: 10.2" (260mm)

•           Rear wheel to wheel outside: 9.5" (241mm)

• Wheelbase: 12.5" (317.5mm) max

• Height: 5.25 - 6.75" (133 - 172mm)

• Ground Clearance: 1.75 - 3.40" (44.5 - 86.5mm)

• Gear Ratio: 37.9:1 with included 14T pinion

•   Body,

• Length: 12.75" (324mm)

• Width: 5.25" (134mm)

• Height: 3.5" (89mm)

Contents

• XR10 Competition Rock Crawler with wheels, beadlocks, clear body, instruction manual and decals

Requirements

• Radio: 2-4 channel with one servo for steering

• Motors: Two 540 size

• Electronic Speed Control: For selected motors

• Tires: 2.2" crawler type with foam inserts such as the Pro-Line

• Chisel, PROC4914

• Battery: Compact LiPo recommended

• Battery Charger: LiPo compatible

• Building and track equipment

Comments

• For Replacement Ball Bearings use:

•  Qty. Size                    Location                        Qty. Bearing Set

•   4     5x8x2.5mm          flanged Gear Shaft          2    DTXC1527

•   4     5x8mm                Gear Shaft                      2    DTXC1523

•   2     5x8x2.5mm          flanged Stepped Gear      1    DTXC1527

•   3     5x8mm                Gearbox                         2    DTXC1523

•   2     15x21mm            Final Gear                        1   AXIC1243

•   2     5x11mm              Steering Knuckles             1    DTXC1547

•   2     10x15mm            Steering Knuckles             1    DTXC1595