Custom Works 0715 Rocket Nitro Late Model Kit

This is the 1/10 scale glow powered, radio controlled, on-road Rocket Late Model Kit from Custom Works R/C Products. Recommended for modelers 16 years of age and older.

Features

• Custom Works 0715 Rocket Nitro Late Model Kit

• Chassis: Machined aluminum 0.14" (3.5mm) thick

• Drive: Rear wheel

• Shock Towers: Molded plastic

• Shocks: Four oil-filled MDX long, aluminum bodied with coil over spring

• Transmission: GT type, with adjustable slipper clutch

• Differential: Ball type

• Body: Two-piece late model Eldora racing style

• Clutch: Two-shoe composite with steel clutch bell

• Fuel Tank: 2.5oz (75cc)

• Brake: Single composite disc

• Tires: Street Trac Front, 1" (26mm) wide, Rear, 1.2" (32mm) wide both 2.8" (72mm) outer diameter, foam inserts

• Wheels: Dish style Front, 1" (26mm) wide, Rear, 1.2" (32mm) wide both 2" (51mm) diameter, gray in color

• Caster: Adjustable front and rear, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis

• Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle

• Bumper: Front, shock resistant

• Spur Gear: 32 pitch 66 tooth composite construction

Specifications

• Dimensions are not provided. Contact manufacturer for further info.

Contents

• Rocket Late Model Car Kit with small tube of diff grease, spur gear, clutch, tires, wheels, foam inserts, clear body, window masks and instruction manual

Requirements

• Radio: 2-channel with two standard size servos

• AA Batteries: 8 for transmitter

• Engine: .12 cu in

• Exhaust: Tuned pipe and header

• Shock Oil: 40 weight

• Engine starter, fuel bottle, building and track equipment

Comments

• For Replacement Ball Bearings use:
  Qty.                   Size                       Location                     Qty.                         Bearing Set
  4                  3/16x3/8"                Fr Bearing Carrier              2                           DTXC1423
  4                   3/16x3/8"               Rear Bearing Carrier          2                           DTXC1423
  4                   3/16x3/8"               Transmission                    2                           DTXC1423
  2                   3/8x5/8"                 Transmission                    1                           DTXC1437
  1                   3/16x3/8"               flanged Clutch                   1                           CSWC4439
  1                   5x10mm                 Clutch                              1                            DTXC1535