Custom Works 0928 Enforcer GSX2 Kit

This is the nitro powered, radio controlled 2WD Custom Works Enforcer GSX2 Dirt Oval Racer Kit.

Features

• Custom Works 0928 Enforcer GSX2 Kit

• Chassis: High strength, carbon fiber construction (4mm thick)

• Roll Cage: Injection molded nylon construction, white in color

• Body: Four clear Lexan panels

• Shocks: Four coil-over large volume with threaded, anodized blue aluminum bodies (50wt shock oil included)

• Shock Towers: High strength, carbon fiber construction, adjustable rear tower allows easy adjustment od car width and ride height

• Transmission: Racing GT type, single speed with 2.60 ratio

• Fuel Tank: 2.5oz (75cc) with flip top cap

• Clutch: Two shoe

• Clutch Bell: Steel construction with 23 tooth aluminum pinion

• Spur Gear: 66 tooth, 32 pitch

• Differential: Ball type

• Steering: Rack type with links

• Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis

• Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle

Specifications

• Dimensions and weight not provided by manufacturer

• Transmission Ratio: 2.60:1

Contents

• Custom Works Enforcer GSX2 Dirt Oval Racer Kit, lexan body panels, wing, side dams, braces and mounting brackets, 2.5oz (75cc) fuel tank, 23 tooth bell pinion, 60 tooth spur gear and instruction
  manual

Requirements

• Engine: .12 cu in rear exhaust, slide valve (clutch parts for either a threaded shaft or pilot shaft type engine are included)

• Exhaust: Header and Tuned Pipe

• Tires: Street track design, CSWC6204 front and CSWC6214 rear

• Wheels: Black nylon dish design CSWC6252 front and CSWC6253 rear

• Radio: 2-channel with 2 standard size servos

• Radio Batteries: Eight AA cells

• Receiver Battery: 5-cell rechargeable

Comments

• For Replacement Ball Bearings use:
  Qty.                        Size                          Location                             Bearing Set              Qty.
  4                     3/16x3/8"                       Front wheels                           DTXC1423               2
  4                     3/16x3/8"                        Rear Hubs                              DTXC1423              2
  2                     5/32x5/16"                     Diff gear and outdrive               DTXC1411               1
  4                     3/16x3/8"                       Gearbox                                  DTXC1437               2
  2                     3/8x5/8"                         Gearbox                                   DTXC1437              1
  1                     5x10mm                      Clutch Bell Inner Bearing                DTXC1541              1
  1                     3/16x3/8"                     Clutch Bell Outer Flanged Bearing     CSWC4439           1

• The use of a remote glow plug kit is suggested (MODP1221). Without
  the use of this kit the wing will have to be removed for access to
  the glow plug.