DuraTrax IntelliPeak ICE DC Competition Charger DTXP4170
This is the DuraTrax Ice Battery Charger, Discharger and Cycler.
* Five-Year Warranty
Features
-
DuraTrax IntelliPeak ICE DC Competition Charger DTXP4170
-
Handles 1-10 NiCd or NiMH
cells, and 1-4 Lithium Ion (Li-Ion) or Lithium Polymer (LiPo) cells
-
Wide adjustable current ranges
for Fast Charge (.1A-8A) and Discharge (.1A-10A) are ideal for electric
cars, trucks and boats
-
Four Charge modes: Linear,
Reflex, Impulse, and 4-step* * The optional battery temperature monitor is
required for 4-step
-
Charge feature (DTXP4171)
-
"Constant Current/Constant
Voltage" Charge method for Li-Ion/LiPo batteries
-
Reverse Polarity Protection
-
Peak Detection with adjustable
sensitivity for NiCd & NiMH batteries
-
0-500mA adjustable TRICKLE
Charge current for NiCd and NiMH
-
.8V-1.1V adjustable Discharge
cut-off voltage for NiCd and NiMH
-
2.5V-3.7V adjustable Discharge
cut-off voltage for Li-Ion/LiPo
-
Performs 1-10 cycles (NiCd and
NiMH only)-retrieves data for 10 full cycles
-
Stores info for up to 10
batteries in memory by custom names for easy recall and charger set-up
-
LCD screen shows 8 lines of
data and 21 characters per line
-
1-8V adjustable output, time
adjustable from 1-120 minutes and 10A Constant Current (30A surge) for motor
break-in
-
Also breaks-in electric motors
and operates commutator lathes
Specifications
-
Input Voltage: 11-15V DC
-
Battery Types, # of cells:
-
1-10 Nickel Cadmium cell
(1.2-12V)
-
1-10 Nickel Metal Hydride
cells (1.2-12V)
-
1-4 Lithium Ion or Lithium
Polymer cells (3.6-14.8V)
-
Battery Capacity Range:
100-9900mAh
-
Fast Charge Current: .1-8A
Linear, Reflex, Impulse and 4-step
-
Fast Charge Termination: Peak
Detection for NiCd and NiMH
-
"Constant Current/Constant
Voltage" for Li-Ion/LiPo, optional thermal cutoff for all battery types
-
Peak Sensitivity: 0-25mV
adjustable
-
TRICKLE Charge Current:
0-500mA (n/a for Li-Ion/LiPo)
-
Discharge Current: .1-10A
adjustable
-
Discharge Cut-Off Voltage:
.8-1.1V per cell NiCd & NiMH 2.5-3.7V per cell Li-Ion/LiPo
-
Temperature Cut-Off Range:
50-132°F
-
Cycle Count: one to ten (n/a
for Li-Ion/LiPo)
-
Cycle Cooloff Delay: 1-30
minutes, adjustable
-
Battery Memories: 10
-
Display Type: 8x21 LCD (168
characters max)
-
Graphical Displays: Graphs
Charge and Discharge Voltage curves
-
Output Connectors: Banana
jacks
-
Motor Break-in: 1-8V
selectable, 1-120 minutes, 10A constant
-
Case Size: 5.5" x 1.8" x 5.9"
(140x45x150mm)
-
Weight: 21oz (605g)
Contents
-
One DuraTrax IntelliPeak ICE
charger w/ banana jacks on output lead, alligator clip charge leads, Tamiya
style charge lead, input lead with pre-installed banana plugs, large
alligator clips, and instruction manual
Requirements
-
12V DC power from a Power Supply or automotive battery or Hobbico 12V Power
Supply (HCAP0250) or Rivergate 15A DC Bulldog Power Supply (RHCP2015)
-
To achieve ICE's absolute maximum output power capabilities the DC power
source must be capable of delivering at least 15A while maintaining 12V DC
(although 12.5A is enough for most functions).
-
Charge Leads depending on type of battery;
-
DTXC2220 Charge Lead Banana to Standard
-
DTXC2221 Charge Lead Banana to DNS Male
-
DTXC2222 Charge Lead Banana to Traxxas
-
DTXC2223 Charge Lead Banana to Mini Plug
-
HCAP0101 Futaba J Tx/Rx Charge Leads NO 9VAP
-
HCAP0102 Futaba J Tx/Rx Charge Leads 9VAP ONLY
-
HCAP0105 JR Tx/Rx Charge Leads
-
HCAP0106 Hitec/Airtronics Z Tx/Rx Charge Leads
-
GPMM3149 Charge Lead Banana/Deans Micro
|
|
