DuraTrax LiPo 7.4V 1600mAh 20C 1/16 1/18 Mini Pack RC18 Series DTXC1855

This is the DuraTrax LiPo 7.4V 1600mAh 20C Hard Case Mini Battery Pack with Mini Plug.

Features

• DuraTrax LiPo 7.4V 1600mAh 20C 1/16 1/18 Mini Pack RC18 Series DTXC1855

• For use in the DuraTrax Vendetta, Mini Quake, Cliff Climber and other 1/16 to 1/18 scale vehicles that use batteries with mini plugs

Specifications

• Capacity: 1600mAh

• Number of Cells in Series: 2

• Rated Voltage: 7.4V

• Continuous Discharge Rate: 20C

• Maximum Recommended Charge Current: 1C (1.6 amps)

• Charge Lead: 24AWG, 1.2" (30mm) long wire w/XH Balance Plug

• Discharge Lead: 20AWG, 3.5" (90mm) long wire w/Mini Plug

• Pack Dimensions: 3.3 x 1.2 x 0.7" (85 x 31 x 17mm)

• Weight: 3oz (85g) all plugs and wires are included in weights

Package Contents

• DuraTrax LiPo 7.4V 1600mAh 20C Hard Case Battery Pack with Mini Plug

Requirements

• Balancer such as the Team Checkpoint Balancer TCPP9150, and 2S Adapter XH Plug, TCPP9155

Comments

• ALWAYS use a LiPo-approved Charger

• ALWAYS use a LiPo Cell Balancer

• NEVER Charge over 4.2V per cell

• NEVER Charge at currents greater than 1C

• NEVER Charge through the "To ESC or "DISCHARGE" lead

• NEVER Trickle Charge

• NEVER allow to Discharge below 2.5V per cell

• NEVER disassemble or modify pack wiring in any way or puncture cells

• NEVER place on combustible materials or leave unattended during charging

• ALWAYS Charge in a fireproof location

• ALWAYS set charger's output volts to match battery volts

• ALWAYS keep out of reach of children

• All weights include wire leads and plugs

• All weights +/- 1g

• All measurements +/- 1mm