Duratrax Onyx 100 AC/DC Peak Charger NiCd NiMH DTXP4190

This is the DuraTrax Onyx 100 AC/DC Peak Charger for NiCd and NiMH Batteries.

Features

• Duratrax Onyx 100 AC/DC Peak Charger NiCd NiMH DTXP4190

• Ideal for sport electric car or boat modelers needing a charger that operates on either AC or DC input power and automatically peaks both NiCd and NiMH batteries as small as 600mAh "AAA" and as big as sub-C size-good for 1/18-1/8 scale models

• Lightweight switching AC power supply is great for portability and small pit areas

• Selectable charge currents of 1A, 2A (2A limit on AC) or 4A linear

• Peak detection intelligence eliminates need to track charge state of battery before charge

• Automatic trickle charge tops off packs to maximum power

• Auto-start function with status LED makes setup and use a snap

• Built-in socket for connecting radio batteries

• DC power lead with alligator clips connects to many 12V DC power sources

• Five year warranty

Specifications

• AC Input: 110V AC 60Hz

• DC Input: 11-15V DC, built-in lead with alligator clips

• Battery Types: 4-8 NiCd or NiMH Cells (4.8-9.6V, limited to 7 cells on DC)

• Battery Capacity Range: 600-6000mAh

• Fast Charge Current: 1, 2, or 4A linear (2A limit on AC)

• Fast Charge Termination: Peak detection

• Fast Charge Safety Timer: 90 minutes

• Peak Sensitivity: 8mV

• Auto-Trickle Current: 1/20 fast charge setting

• Controls: auto-start, switchable current selector

• LED Indicator: Red

• Output Connections: Built-in lead with standard connector

• Built-in jack for radio batteries

• Protective Devices: Solid-state reverse polarity and current overload

• Case size: 4.1 x 3.5 x 1.1" (104 x 90 x 29mm)

• Weight: 9.17 oz.(260g)

Contents

• DuraTrax Onyx 100 AC/DC Peak Charger for NiCd and NiMH Batteries and instruction sheet

Requirements

• AC or DC power source

Comments

• N/A