DuraTrax Onyx 210 AC/DC Peak Charger w/LCD DTXP4210
This is the DuraTrax Onyx 210 AC/DC Peak Charger with Backlit LCD.
Charge currents of 800mA, 1.5A, 3A and 5A plus 4-8 cell NiCd or NiMH
compatibility makes this charger great for 1/18-1/8 scale electrics,
nitro receiver packs and even transmitter batteries.
Features
-
DuraTrax Onyx 210 AC/DC Peak Charger w/LCD DTXP4210
-
Charges 4-8 cell NiCd or NiMH
(4.8 - 9.6V) cells with a capacity range of 750-7500mAh
-
NiCd and NiMH compatibility
with custom peak detection
-
Pushbutton controls, audible
tones and a custom LED with backlight for easy setup and use
-
Selectable charge currents of
800mA, 1.5A, 3A and 5A
-
Automatic TRICKLE charge fills
pack completely after peak charge for optimum battery performance
-
Precise peak detection
algorithm with automatic TRICKLE charge fills packs completely for optimum
voltage and run time
-
Built-in jack included for
charging 4 or 5 cell NiCd or NiMH receiver batteries for nitro models and
even transmitter batteries
-
LCD shows battery voltage,
charge current, time, capacity, battery type and more
-
Small, lightweight switching
AC power supply delivers up to 5 amps of charge current
-
Solid state reverse polarity
and current overload safety devices
-
FIVE YEAR warranty
Specifications
-
AC Input: 110V AC 60Hz
-
DC Input: 11-15V DC, built-in
lead with alligator clips
-
Battery Types: 4-8 NiCd or
NiMH cells (4.8-9.6V)
-
Battery Capacity Range:
750-7500mAh
-
Fast Charge Current: 0.8A,
1.5A, 3A, 5A linear (40W)
-
Fast Charge Termination: Peak
detection
-
Fast Charge Safety Timer: 90
minutes
-
Peak Sensitivity: 8mV for NiCd,
4mV for NiMH
-
Auto TRICKLE Current: 1/20
fast charge setting
-
Input Control: 3-pushbuttons
-
Display Type: 7-segment custom
LCD with backlight
-
Audible Tones: Indicate start,
stop, errors
-
*Output Connections: Built-in
lead with standard connector
-
Built-in jack for charging 4
or 5 cell Rx or Tx packs
-
*Standard to Deans Ultra Male
Adapter available separately (GPMM3131)
-
*Standard to Vendetta,
MiniQuake, RS4 Battery available separately (DTXC2210)
-
Protective Devices:
Solid-state reverse polarity and current overload
-
Case size: 5.75 x 5.25 x 1.81"
(146 x 133 x 46mm)
-
Weight: 19.2oz (543g)
Contents
|
|
