-
Emax 150A Electric Brushless
Speed Controller ESC
-
MCU with improved performance.
-
Low-voltage protection,
over-heat protection, signal loss protection, safe power on protection, and
self-check functions.
-
Excellent startup performance,
great throttle linear and quick throttle response.
-
Excellent low-speed
performance.
-
Max speed: 240,000 rpm for
2-pole, 80,000 rpm for 6-pole, 40,000 rpm for 12-pole.
-
Separate power supply for MCU
and BEC, enhancing the ESC’s ability of eliminating magnetic interference.
-
Parameters of the ESC can be
set via program card or transmitter.
-
Throttle range can be set to
be compatible with different receivers.
-
Three throttle linear curve
options make helicopter control more flexible.
-
Motor reverse rotation
available via transmitter programmed only).
-
Low-voltage protection:
Whether to shut down the motor immediately or to lower the power when the
input voltage drops below the programmed low-voltage protection voltage
depends on the values set as Cutoff Type.
-
Loss of signal protection:
Power will automatically lower to 20% or less when signal is lost for 1
second, and resume when detecting the signal.
-
Over-heat protection: When the
temperature increases to above 110 Celsius degree, power will be lowered
gradually to less than 35% of the full power, and will resume when the
temperature decreases.
-
Hardware self-check: The
system will check by itself when the battery is connected. Any hardware
fault, it will make 20 short “beep” sounds.
