Fuji Imvac BT-64EI 63.1cc/3.85CI Gas Engine
This is the Fuji Imvac BT-64EI Gasoline Engine with Electronic Ignition.
For large scale aircraft applications.
Features
-
Fuji Imvac BT-64EI 63.1cc/3.85CI Gas Engine
-
The EIS (Electronic Ignition
System) uses a 4.8V receiver battery to produce spark.
-
A sensor automatically detects
RPM and adjusts timing for easier more reliable starts.
-
System requires less effort to
spin the prop, is lighter in weight for less vibration and rotating mass on
the crankshaft.
-
CNC machined using
highly-specialized state-of-the-art equipment, for better overall quality
and a tighter parts fit.
-
Walbro carburetor
-
True chrome-plated cylinder
-
Dynamic balancing of
flywheels, prop hubs, and crankshafts
-
Throttle linkage for R/C use,
engine is ready for installation into giant scale airplanes, with no
conversions neccessary
-
THREE YEAR limited warranty
Specifications
-
Displacement: 3.85 cu in
(63.1cc)
-
Practical RPM Range: 1100-9000
-
Output: 5.7hp @ 9000 RPM
-
Weight: 5.25 lbs (2,383 g)
with muffler 4.68 lbs (2,126 g) without muffler
-
Recommended Propeller: 24x10
(TOPQ5270)
-
Distance between mounting
holes: 2.7" (70mm)
-
Width not including muffler or
carburetor: 3.3" (84mm)
-
Width including muffler and
carburetor: 8" (203mm)
-
Distance between carburetor
and center of crankshaft: 3.8" (98mm)
-
Distance between muffler and
center of crankshaft: 4.1" (104mm)
-
Distance/top of cylinder head
to center of crankshaft: 5" (126mm)
-
Total height: 8.4" (213mm)
-
Distance/rear of engine to
outer edge of prop flange: 5.6" (143mm)
Contents
-
One BT64EI engine, Champion RCJ6Y spark plug, muffler, firewall mount
illustrated instruction manual, Walbro carburetor, EIS prop flange,
prop washer, 11" (280mm) gas tubing, two 6mm washers,
two M6x65 muffler screws, two M5x12 screws with lock washers,
four 5mm x 22mm screws with washers and lock washers,
4mm hex wrench, 10mm prop bolt
Requirements
|
|
