Futaba 10CGH 2.4GHz Integrated R6014HS Heli Mode 2 FUTK9256
This is the Mode 2 Helicopter Version Futaba 10CG Transmitter
and R6014FS 14-ch Receiver with the
2.4GHz FASST system.
No Servos Included. This version is Mode 2 **For European Standard Mode 1 order FUTK9258**
This heli version will default to helicopter settings, with mode 2 stick operation when powered up and has a non-ratcheted throttle stick.
Features
-
Futaba 10CGH 2.4GHz Integrated R6014HS Heli Mode 2 FUTK9256
-
Futaba's FASST (Futaba
Advanced Spread Spectrum Technology) shifts very quickly virtually
eliminating signal conficts and interruptions unlike other 2.4GHz systems
that only stay on one or two frequencies
-
Dual antenna diversity enables
FASST system to automatically and seamlessly select the best reception
between the two antennas built into the receiver ensuring that the aircraft
stays under constant control of transmitter regardless of altitude
-
7 point throttle and pitch
curves
-
12 factory defined glider
mixes
-
Logic switches allows timer
activation or other function just by changing positions of specific sticks
or switches
-
15-model memory, expandable to
48 models with optional 128K CAMPac module (FUTM9408)
-
10-character model and user
naming
-
Assignable switches and
dials/functions
-
2 proportional slider switches
-
Model select, copy, reset
-
Fail-safe, sub trims, servo
reversing and EPA
-
160 x 72 backlit LCD with
adjustable contrast
-
Servo monitor display
-
Auxilliary channel screen for
1-step function/switch assignment
-
One year limited warranty
Specifications
-
Transmitter;
-
Power Supply: 9.6V NT8S700B
NiCd battery
-
Receiver;
-
Receiving Frequency: 2.4GHz
-
Power Requirement: 4.8 - 6V
-
Current Drain: 70mA
-
Size: 2.06 x 1.48 x 0.63"
(52.3 x 37.5 x 16.0mm)
-
Weight: 0.72oz (20.8g)
Contents
-
Futaba 10C Transmitter with
Module
-
NT8S700B 9.6V 700mAh NiCd
Transmitter Battery , FUTM1460
-
FBC-19B RX, TX Wall Charger,
FUTM1830
-
R6014FS Receiver, FUTL7644
-
Switch Harness
-
8" (203mm) Servo Extension
-
Neck Strap, FUTM5690
Requirements
Comments
|
|