| Features
Futaba 2PL 2-Channel AM/2 S3003 Servos FUTK02**
This is the Futaba 2PL AM Computer Radio system with two S3003 Servos
and the R152JE Receiver.
 Features
-
Futaba 2PL 2-Channel AM/2 S3003 Servos FUTK02**
-
One-button programming for
fast and easy menu access
-
Ten model memory stores and
selects preset programming for up to ten different models
-
One trim switch allows setting
and adjusting trims without returning to the menu
-
Steering dual rate
strategically located on the grip close to the trigger offers more mid-range
control, crucial when cars are going into corners
-
Steering/Throttle End Point
Adjustment (EPA) limits servo travel for more control and to prevent servo
damage
-
ABS braking initiates ON and
OFF pulsing for less skidding and can be set for slow, mid, or fast pulsing
-
One Year Warranty
Package Contents
-
One 2PL Magnum Transmitter
with crystal
-
One R152JE receiver with
crystal
-
Two S3003 Standard Servos with
installed X style servo horns.
-
One Switch Harness
-
Two Servo Accessory packs
-
One 4-cell Receiver battery
holder
-
Instruction Manual
Specification
-
S3003 Servo
-
Speed: .23 sec/60° @ 4.8V or
.19 sec/60° @ 6V
-
Torque: 44.3 oz-in @ 4.8V or
56.8 oz-in @ 6V
-
Size: 1.59"L x .78"W x 1.42"H
(40.4x19.8x36mm) w/o output shaft
-
Weight: 1.31oz
(37.2g)Connector: "J" type with approx. 5" lead
-
R152JE Receiver
-
Length: 1.65" (42mm) Receiving
Frequency: 75MHz
-
Width: 1.10" (28mm)
Intermediate Frequency: 455kHz
-
Height: .67" (17mm) Power
Requirement: 4.8-6V shared w/servo
-
Weight: .59oz (16.7g) Current
Drain 12mA (at No signal)
Requirements
|
|
