| Features
Futaba 3PM 3-Channel FM/2 S3003 Servos FUTK17**
This is the Futaba 3PM FM 3-Channel Surface Computerized Pistol
Grip Radio with the R153F Receiver and two S3003 Standard Servos.
 Features
-
Futaba 3PM 3-Channel FM/2 S3003 Servos FUTK17**
-
10-model memory
-
Alphanumeric LCD screen with
high intensity Blue LED monitor, can be changed to three different
brightness levels
-
Condition switch-in specific
functions low rates can be set up and switched with SW1 switch
simultaneously during a run Alarm buzzer
-
Model copy and clear functions
-
ABS Braking
-
Brake mixing for large cars
-
One-channel program mixing
-
Steering and throttle Expo
-
Servo reversing on all
channels
-
End Point Adjustment (EPA) for
all channels
-
Multi-function timer up/down
with lap memory
-
Steering dual rates
-
Throttle ATL
-
Digital trims
-
Function select dial/switch
-
Steering speed
-
Charge jack for optional NiCds
-
One year warranty
Package Contents
-
One 3PM FM Transmitter
-
One R153F FM receiver
(FUTL0364)
-
Two S3003 Standard Servos
(FUTM0031)
-
One crystal set (FUTL97**)
-
One receiver battery box w/"J"connecter
-
One switch harness (FUTM4350)
-
Two accessory package w/rubber
grommet, screw, brass eyelet (FUTM3551)
-
One frequency flag set
-
One instruction manual
-
Optional Transmitter NiCd:
(FUTM1462) or FUTM1440
-
Optional Receiver NiCd:
(FUTM1295)
-
Optional NiCd Charger:
(FUTM1830)
Specification
-
S3003 Servo: R153F Receiver:
Torque: 56.9 oz-in (4.1 kg-cm) Power Requirement: 4.8V or 6V Speed: .19
sec/60° Length: 1.5" (37.7mm) Power Requirement: 4.8V or 6V Width: 1"
(25.4mm) Length: 1.59" (40.4mm) Length: Height: .6" (14.3mm)
Width: .78" (19mm) Weight: .50oz (14.1g) Height: 1.42" (36mm) Weight: 1.31oz
(37.2g)
-
T3PM Transmitter:Modulation:
FM (HRS/PPM switching possible) Power Requirement: 8 AA cells or NT8F700B
NiCd battery (9.6V) Current Drain: 250mA or less
Comments
-
If you would like to use
optional NiCds with your transmitter, we recommend an assembled pack, not
individual cells. If individual NiCd cells are used the battery tray could
be damaged during charging.
Requirement
|
|
