| Features
Futaba 4YF 4-Channel FM/4 S3004 Servos FUTJ40**
This is the Futaba 4YF 4-Channel FM Radio System
with the R168DF Receiver and four S3004 Ball Bearing Servos.
 Features
-
Futaba 4YF 4-Channel FM/4 S3004 Servos FUTJ40**
-
All-channel servo reversing
for more installation options
-
Transmitter and receiver NiCds
made from genuine Sanyo cells can be recharged simultaneously with the
included 50mA overnight charger
-
Power and servo reversing
switches are located down and out of the way for convenience and to avoid
accidental changes
-
The battery meter features one
Green and one Red LED for easy-to-read
-
GO/NO GO status.
-
Ball bearing servos for
smoother operation than standard servos
-
Spring loaded trainer toggle
switch for instant "OFF"
-
Gimbals have knurled tops for
a better "feel" on the sticks and to
-
prevent finger slippage.
-
One year limited warranty
Package Contents
-
One Futaba 4YF 4-channel FM
radio system with NiCd batteries, charger frequency flags, neck strap, servo
tray, switch harness, four S3004 servos, servo mounting hardware,
transmitter and receiver crystals and R168DF Receiver
Specification
-
Transmitter: Modulation
Method: FM (Frequency Modulation) Power Requirement: 9.6V NiCd battery
Curent Drain: 180mA Trainer cord port is a micro port (Square)
-
R168DF Receiver: Length: 2.2"
(55.5mm) Width: 1.1" (28.5mm) Height: .8" (19.8mm) Weight: 1oz (28g)
-
Charger: FBC-8B(4) (FUTM1800)
Input: 120V AC 60Hz 4W Output: Tx 9.6V DC 50mA Rx 4.8V DC 50mA Tx battery:
600mAh (FUTM1440) Rx battery: 600mAh (FUTM1295) Bands: 72,75MHz
-
S3004 Ball Bearing Servo
FUTM0004 Speed: .23 sec/60° @ 4.8V .19 sec/60° @ 6V Torque: 44.3 oz-in (3.2
kg-cm) at 4.8V 56.8 oz-in (4.1 kg-cm) at 6V Length: 1.59" (40.4mm) Width:
.78" (19.8mm) Height: 1.42" (36mm) Weight: 1.30oz (38g) Connector: "J" type
with approx. 5" wire
Requirement
|
|
