Futaba 6JH Heli 2.4G SFHSS R2006GS
4-S3001 FUTK6002
This is the Futaba 6JH 6-Channel
2.4GHz
S-FHSS and FHSS Selectable Mode
Radio System with the R2006GS Receiver and four S3001 Ball Bearing Servos.
This is the helicopter version
with the non-ratcheted throttle stick.
Features
-
Futaba 6JH Heli 2.4G SFHSS
R2006GS 4-S3001 FUTK6002
-
Selectable S-FHSS and FHSS
modes, the included R2006GS receiver automatically adapts to the selected
mode
-
15 model memory with 4
character model naming
-
40x40 127 segment LCD display
-
Mode 1-4 selectable
-
R2006GS high-voltage (4.8 -
7.4V) 6-channel receiver with Easy-Link circuitry, frequency hopping, spread
spectrum design and Dual Antenna Diversity
-
Fail safe (all channels in S-FHSS
model only)
-
Endpoint adjustment (EPA), sub
trims, servo reversing & throttle cut
-
Throttle position, mix and low
battery warnings
-
Trainer system (trainer cord
not included)
-
One year limited warranty
through Hobby Services beginning at date of purchase
-
Airplane Features;
-
Two programmable mixes
and two 5-point throttle curves
-
Two 5-point pitch
curves
-
Flaperon with
differential rate
-
Flap trim (2 rates)
-
V-tail mixing
-
Elevon mixing
-
Helicopter Features;
-
Two 5-point throttle
curves
-
Three 5-point pitch
curves
-
Throttle hold
-
Hover pitch
-
Gyro and revo mixing
-
Four swash plate types
(H1, H3, HR3 & H3 w/AFR)
-
Swash AFR (ail/ele/pitch)
-
Throttle mix
-
Electronic swash ring
-
Throttle and pitch
delay
Specifications
-
Transmitter;
-
Type: 2-stick, 6-channel, FHSS/S-FHSS
selectable
-
Frame Rate: 6.8ms
Current Drain: 170mA
-
Receiver;
-
Modes: FHSS or S-FHSS (auto
selectable)
-
Power Requirements: 4.8V-7.4V
-
Compatible Batteries: NiCd,
NiMH, LiPo, LiIon & LiFe
-
Dimensions: 1-11/16 x 15/16 x
5/16" (43 x 24 x 7.9mm)
-
Weight: 0.29oz (8.3g)
-
Current Drain: 80mA (@ no
signal)
-
S3001 Servo;
-
Dimensions: 1.6 x 0.8 x 1.4"
(1-9/16 x 13/16 x 1-7/16")
-
(40 x 20 x 36mm)
-
Weight: 1.6oz (1-9/16oz) (44g)
-
Torque: 33 oz-in (2.4kg-cm) @
4.8V
-
42 oz-in (3.0kg-cm) @ 6V
-
Transit: 0.28 sec/60° @ 4.8V
-
0.22 sec/60° @ 6V
Contents
-
Futaba 6J 6-Channel
Transmitter, R2006GS Receiver and Instruction Manual, Neckstrap, Servo Tray
and Mounting Hardware, On/Off Switch and ratchet spring
-
Four S3001 Standard Ball
Bearing Servos, FUTM0029
Requirements
|
|
