| Futaba 7C 2.4GHz Helicopter Radio
System with the R617FS FASST 7-Channel Receiver, and four S3152 Digital
High-Torque Servos. This is the helicopter version which will default to
heli settings when powered up and does not have a ratcheted throttle stick.
Modeler can change from the default mode (mode 2 in USA) by holding the Mode
and End keys and then turning transmitter On to access the STK feature,
changing mode and turning transmitter Off and then On again. It is
recommended to send transmitter to the Futaba Service Center to change
switch operation.
 Features
-
Futaba 7C 7-Channel 2.4GHz
Heli R617FS 4-S3152 Servo FUTK7001
-
Futaba's FASST (Futaba
Advanced Spread Spectrum Technology) shifts very quickly virtually
eliminating signal conflicts and interruptions unlike other 2.4GHz systems
that only stay on one or two frequencies
-
Dual antenna diversity enables
FASST system to automatically and seamlessly select the best reception
between the two antennas built into the receiver ensuring that the aircraft
stays under constant control of transmitter regardless of altitude
-
Newly designed Dial-N-Key jog
dial with joy stick button allows cursor movement in four directions for
very user friendly navigating through menus and programming
Specifications: Futaba 7C Transmitter
Specifications: Futaba R617FS FASST Receiver FUTL7627
-
Size: 1.6 x 1.1 x .35" (40
x 27 x 9mm)
-
Power Requirement: 4.8 -
6V
-
Current Drain: 80mA (at no
signal)
-
Weight: 0.34oz (9.8g) with
case, 0.25oz (7g) without case
Specifications: Futaba S3152 Digital High-Torque Servo FUTM0311
-
Speed: .22 sec/60° @ 4.8V,
.18 sec/60° @ 6V
-
Torque: 69 oz-in @ 4.8V,
87 oz-in @ 6V
-
Weight: 1.5oz (42g)
-
Length: 1.6" (41mm)
-
Width: 0.8" (20mm)
-
Height: 1.5" (38mm)
Package Contents
-
Futaba 7C 2.4GHz Transmitter
-
R617FS FASST 7-Ch Receiver
(FUTL7627)
-
NR-4RB 1000mAh 4.8V NiCd
Receiver Battery (FUTM1380)
-
FBC-19B(4) 120V Battery
Charger (FUTM1830)
-
Four S3152 Digital High Torque
Servos (FUTM0311)
-
NT8S600B 600mAh 9.6V NiCd
Transmitter Battery (FUTM1457)
-
Switch Harness w/Charge Cord
(FUTM4370)
-
Black Transmitter Neck Strap
(FUTM5690)
-
Servo mounting hardware and
instruction manual
|
