| Features
Futaba R113iP 3-Channel PCM Receiver 75MHz w/o Crystal FUTL0304
This is a R113iP 3-Channel 75MHz Micro PCM1024 Receiver "Without Crystal".
This is a receiver without a crystal (see REQUIRES and COMMENTS).
 Features
-
Futaba R113iP 3-Channel PCM Receiver 75MHz w/o Crystal FUTL0304
-
Narrow-band spacing and superior
signal filtering combined to provide exceptionally clear, interference-free
reception and amazingly smooth, accurate control.
Specifications
Package Contents
Requirements
Comments
-
For the transmitter/receiver
crystal set, use FUTL97**.
-
Special Notice about Frequency
Changes- *72MHz- Low band channels 11 to 35; High band channels 36 to 60.
Receiver crystal channels (11-35 or 36-60) Within Each Band Can Be Changed,
and Do Not Require a retuning of the receiver. *72MHz Frequency Band (Low or
High) for the receiver Can Not Be Changed from Low to High band, OR from
High to Low band without sending it into Futaba Services for retuning.
*50MHz, 72MHz, 27MHz and 75MHz Frequency Bands Can Not under any
circumstances be interchanged with each other. The receiver Must be sent in
for retuning to the appropriate band. *50MHz, 27MHz and 75MHz receiver
crystals Can be changed anywhere within the respective bands. There are no
High or Low bands such as the 72MHz band has. *Transmitter Crystals Can Not
be changed to another channel except by a licensed service center. It is
against FCC regulations, and illegal for the user to change a frequency
determining component of a transmitter. If the radio is not retuned, it can
be a hazard spectators, modelers or property, and void AMA insurance
coverage. *Check with the local R/C club for the frequencies used in your
area.
|
|
