| Features
Futaba R148DP 8-Channel PCM 72MHz Low w/o Crystal FUTL0822
This is a R148DP 8-Ch 72MHz PCM 1024 Dual Conversion Micro Receiver
Without Crystal.
This is a Low Band (channel 11-35) receiver without a crystal (see REQUIRES).
 Features
-
Futaba R148DP 8-Channel PCM 72MHz Low w/o Crystal FUTL0822
-
Narrow-band spacing and Dual
Conversion signal filtering combine to provide exceptionally clear,
interference-free reception and amazingly smooth, accurate control.
Specifications
Package Contents
Requirements
Comments
-
1024 Resolution is NOT
Compatible with Older PCM 512 Systems.
-
For the transmitter/receiver
crystal set, use FUTL20**.
-
For the High Band, use
FUTL0823.
-
Special Notice about Frequency
Changes-
-
*72MHz- Low band channels 11
to 35; High band channels 36 to 60. Receiver crystal channels (11-35 or
36-60) Within Each Band Can Be Changed, and Do Not Require a retuning of the
receiver.
-
*72MHz Frequency Band (Low or
High) for the receiver Can Not Be Changed from Low to High band, OR from
High to Low band without sending it into Futaba Services for retuning.
-
*50MHz, 72MHz, 27MHz and 75MHz
Frequency Bands Can Not under any circumstances be interchanged with each
other. 72/75:receiver Must be sent in for retuning to the appropriate band.
50/27: can't do.
-
*50MHz, 27MHz and 75MHz
receiver crystals Can be changed anywhere within the respective bands. There
are no High or Low bands such as the 72MHz band has.
-
*Transmitter Crystals Can Not
be changed to another channel except by a licensed service center. It is
against FCC regulations, and illegal for the user to change a frequency
determining component of a transmitter. If the radio is not retuned, it can
be a hazard spectators, modelers or property, and void AMA insurance
coverage.
-
*Check with the local R/C club
for the frequencies used in your area.
|
|
