| Features
Futaba S3150 Slim Digital Servo
FUTM0303
This is the Futaba S3150 Digital
Wing Aileron Servo with J Connector.
Designed for aileron applications
on gliders, jets, and electric planes.
Futaba S3150 Slim Digital Servo
FUTM0303 can produce high-current draw from your batteries. If using NiMH or
LiPo batteries, make sure they are capable of delivering sufficient amps.
 Features
-
Futaba S3150 Slim Digital
Servo FUTM0303
-
Coreless motor
-
2 ball bearings
-
Metal gears
-
Digitally enhanced
microprocessors cut about half the response time
-
from transmitter input to
servo reaction
-
Dust and water resistant-not
water proof
-
Compact design is especially
suited for easy installation inside
-
the wing of smaller gliders,
jets and electric planes.
-
Black plastic case
-
One year warranty
Specifications
-
Speed: .25 sec/60° @ 4.8V
-
Torque: 51.4 oz-in @ 4.8V
-
Dimensions: 1.1x.5x.8 in
(28x13x19.7mm)
-
Weight: .80oz (23g)
-
Power Supply: 4.8V (Futaba
does NOT recommend using 6V)
Package Contents -
Futaba S3150 Slim Digital
Servo FUTM0303
-
one 1" (25mm) star shaped horn
-
one 1.5mm (39mm) star shaped
horn, one 1.8" (45mm) straight arm
-
one 1.4" (35mm) diameter horn,
two each-screws, eyelets, and grommets
Comments
-
S3150 Digital Servo
Precautions, -It is best to avoid long leads and Y-harnesses especially with
standard grade wires. If problems are encountered, consider using heavy duty
wire such as Futaba's Heavy Duty Series or Hobbico's Pro Series,minimizing
lead lengths, and/or removing Y-harnesses. -Current Drain: This Digital
Servo is specially designed for high- torque or high-speed, therefore very
high current drain is normal at startup. For ultimate performance when using
this servo please review the following points. 1. Radio systems with the
Battery Fail Safe function have a higher cut-off voltage setting which will
cause shorter operation time. 2. When installing the servo, please check
pushrod linkage to make sure there is no binding in order to prevent
excessive power consumption and decrease the life of the motor and battery.
-
If servo horn screws are
needed, order FUTM2291. If a servo horn is needed use part number: FUTM1985
(the screw included in this package will not work, you must use the
original) If case set is needed, order FUTM3073.
-
A note on coreless motors:
conventional servo motors have a steel core armature wrapped with wire that
spins inside the magnets. In a coreless design, the armature uses a thin
wire mesh that forms a cup that spins around the outside of the magnet
eliminating the heavy steel core. This design results in smoother operation
and faster response time.
-
This digital servo cannot be
used with the following * AM * transmitters as the servo neutral signal is:
1310us). CONQUEST AM, FG Series (T4FG, T5FGK,T6FG, T6FGK, T7FGK), New
Terratop, T3EGX, T3PGE, T2NL, T2LGX, T2FR, T2PK series.
-
**** Otherwise they will work
fine with current AM systems *****
|
|
