Great Planes Dazzler 40 ARF GPMA1038
This is a Radio Controlled, Glow Powered, Almost Ready-to-Fly,
Great Planes Dazzler .40 Aerobatic Airplane.
For Intermediate to Advanced Modeler/Fliers.
Recommended for modelers who have had trainer airplane experience and
also safely flown/landed .40 Size low wing planes.
Features
-
Great Planes Dazzler 40 ARF GPMA1038
-
Construction: Factory-built,
lightweight, interlocking all-wood main structures.
-
Wings: Fully-symmetrical,
all-wood with oversized control surfaces.
-
Servo tray is mounted in the
root ribs to make efficient use of space. The wings are also glued into the
fuselage providing extra strength for high-stress maneuvers.
-
Covering: Factory-applied
pre-printed graphics in an eye-catching trim scheme with a rainbow of colors
on the top, and a White bottom for flight orientation.
-
Radio Compartment: Large
removable hatch located beneath the fuselage for reaching the radio, fuel
tank and fuel lines easily.
-
Canopy: Pre-painted Black,
closed cockpit.
-
Dual aileron servos: Yes,
these servos speed up response time while reducing aileron flutter.
-
Landing Gear: Fixed, pre-bent
main and tail gear wires.
-
Hardware Package: High-quality
Great Planes hardware
-
Building Time: Ready to fly in
only 12 - 15 hours.
-
Warranty: Great Planes Model
Manufacturing Company guarantees this kit free from defects in both
materials and workmanship at date of purchase.
Specifications
-
Wingspan: 48" (1220mm)
-
Wing Area: 578 sq in (37.3 sq
dm)
-
Weight: 4.25-4.75lb
(1.9-2.2kg)
-
Wing Loading: 17-19 oz/sq ft
-
Length: 43" (1090mm)
-
Airfoil: Fully-Symmetrical,
Low-Wing
-
Center of Gravity: 3" (75mm)
Back from the wing's leading edge at the fuselage sides.
-
Control Throws: Low Rate High
Rate
-
Ailerons: Up & Down 3/8"
(9.5mm) ¾" (19mm)
-
Elevator: Up & Down 3/8"
(9.5mm) ½" (12.7mm)
-
Rudder: Right & Left 1¼"
(32mm) 1¼" (32mm)
Contents
-
Pre-built and covered wings, fuselage and tail assemblies, pushrods,
pre-bent main landing gear, tailwheel wire, 2¼" main wheels
1¼" tailwheel, nylon adjustable engine mount,
8oz fuel tank, 2¼" spinner, wood servo trays and wing joiners,
hardware package and photo-illustrated instructions.
NO PARTS ARE AVAILABLE SEPARATELY
Requirements
-
Engine: .32-.46 (5-7.5cc)
(2-stroke) (Mounts in upright position.) OR .40-.52 (6.5-8.5cc) (4-stroke)
(Mounts in upright position.)
-
Muffler: Use the standard
muffler included with engine
-
Radio: 4 Channel
-
Servos: 5 Standard (2-Aileron,
1-Elevator, 1-Throttle, 1-Rudder) (minimum of 40 oz-in torque for flight
controls)
-
Y-Harness: 1 (for aileron
servos)
-
Misc. Items: Glow plug, ¼"
foam rubber padding, medium fuel tubing, fuel filter, propeller, building
and field equipment.
Comments
-
No pilot is included with this
airplane.
-
If a replacement fuel tank is
needed the Great Planes 6oz (180cc) Tank, GPMQ4102 will fit. This tank is
smaller that the original and will give shorter run times. The 8oz version,
GPMQ4103 is the exact replacement but will require removing and plugging the
top nipple on the tank and/or slightly trimming the firewall
|
|
