Great Planes Eagle 580 Matt
Chapman 580 .46-.81 EP ARF GPMA1281
This is the radio controlled, glow
or electric powered, almost ready to fly, .46-.81/EP Great Planes Matt Chapman
Eagle 580 Sport Scale Airplane.
Features
-
Great Planes Eagle 580 Matt
Chapman 580 .46-.81 EP ARF GPMA1281
-
Construction: Built-up balsa
and light plywood fuselage and tail assembly, oversize control surfaces to
enable 3D maneuvers
-
Wings: Two-piece balsa sheeted
foam with carbon fiber wing tube
-
Stabilizer: Two-piece with
carbon fiber tube
-
Aileron Control: Dual servo
-
Rudder Control: Single servo,
aft servo mounting position possible to reduce required tail weight when
using a larger glow engine
-
Covering: Top Flite MonoKote
with authentic Embry Riddle Aeronautical Institute trim scheme
-
Cowl: Painted fiberglass
-
Spinner: Blue plastic 2.5"
(64mm) diameter
-
Landing Gear: Painted
fiberglass
-
Wheels: Main, foam 2.75"
(70mm) diameter, Tailwheel 1-1/4" (32mm)
-
Fuel Tank: Approximately 16oz
(480cc)
-
Engine Mount: Two-piece
composite
-
Cockpit: Pre installed and
painted pilot figure
-
Wheel Pants: Painted
fiberglass
-
Servo Compartment: Plywood
reinforced, accessible under canopy, secures to fuselage with magnets
-
Building Time: 4-6 hours
-
Warranty: Great Planes Model
Manufacturing Company guarantees this kit free from defects in both
materials and workmanship at the date of purchase.
Specifications
-
Wingspan: 53" (1350mm)
-
Wing Area: 645 sq in (41.6 sq
dm)
-
Wing Loading: 21-25 oz/sq ft
(64-76 g/sq dm)
-
Airfoil: Fully symmetrical,
low wing placement
-
Length: 57.5" (1460mm)
-
Weight: 6-7lb (2720-3180g)
-
Center of Gravity: 3-3/4"
(95mm) back from the leading edge of the wing at the fuselage side
-
Control Throws-
Low Rate
High Rate
3D
-
Ailerons:
1/4" (6mm) 4° 15/16" (24mm) 14°
1-3/4" (44mm) 26°
-
Elevator:
3/8" (10mm) 5° 11/16" (17mm) 10°
2-3/8" (60mm) 35°
-
Rudder:
1-3/4" (44mm) 16° 2-1/4" (57mm)
20° 3" (76mm) 28°
Contents
-
.46-.81/EP Great Planes Matt
Chapman Eagle 580 Airplane with landing gear, wheels, decals, pilot figure,
instruction manual, engine mount, fuel tank and spinner
Requirements
-
Glow Power: Minimum 4-ch radio
w/5 standard servos, 2-stroke .46- .61 cu in (7.5 - 10cc) OR 4-stroke .52 -
.81 cu in (8.5 - 13.5cc) engine
-
Electric Power: Minimum 4-ch
radio w/4 standard servos, .80 outrunner brushless motor, 60A brushless ESC,
two 11.1V 3200mAh LiPo batteries, battery charger, motor mount
-
Building and field equipment
Comments
-
Following are the Top Flite
MonoKote colors used to cover this model and order numbers for 6ft rolls;
-
Cub Yellow TOPQ0220
-
Sapphire Blue TOPQ0226
-
Black TOPQ0208
-
If a replacement fuel tank is
needed, order the Sullivan 16oz
-
Flextank (SULQ1743), or
the DuBro 16oz tank (DUBQ0216).
-
Some minor trimming and
modifications may be required.
|
|