Great Planes Edge 540T E-Performance Series 50" 3D EP ARF GPMA1572

This is the electric powered, radio controlled, almost ready to fly ElectriFly Edge 540T Aerobatic Airplane. This 50" class Edge 540T is part of the ElectriFly E-Performance Series.

Features

• Great Planes Edge 540T E-Performance Series 50" 3D EP ARF GPMA1572

• Construction: Balsa and ply with prehinged ailerons and rudder and airfoiled control surfaces, motor box preinstalled with blind nuts providing perfect spacing for spinner backplate-no need for measuring, cowl ring also preinstalled

• Wings: Two piece with carbon fiber wing joiner

• Covering: Top Flite MonoKote

• Aileron Control: Dual servo

• Cowl: Prepainted fiberglass

• Wheel Pants: Prepainted fiberglass

• Landing Gear: Prepainted fiberglass

• Wheels: Main-two foam 2-1/4" (57mm) diameter, tailwheel 3/4" (19mm) diameter

• Spinner: Plastic, white in color 2.25" (57mm) diameter

• Hardware: Full set included

• Building Time: Approximately 6-8 hours

• Warranty: Great Planes Model Manufacturing Company guarantees this kit to be free from defects in both materials and workmanship at date of purchase.

Specifications

• Wingspan: 49.5" (1260mm)

• Wing Area: 490 sq in (31.6 sq dm)

• Weight: 3.25 - 3.5lb (1470 - 1590g)

• Airfoil: Fully symmetrical, mid wing placement

• Wing Loading: 15 - 16oz/sq ft (46 - 49g/sq dm)

• Length: 48" (1220mm)

• Center of Gravity: 2-13/16" (71mm) back from the leading edge of the wing at the side of the fuselage

• Control Throws- Low Rate High Rate 3D

• Elevator: 1/2" (13mm) 8° 3/4" (19mm) 12° 2.5" (64mm) 42°

• Rudder: 2" (51mm) 17° 3.5" (89mm) 30° 5" (127mm) 45°

• Ailerons: 1/2" (13mm) 10° 3/4" (19mm) 15° 1-3/4" (44mm) 40°

Contents

• ElectriFly ARF Edge 540T Aerobatic Airplane with fiberglass cowl, wheel pants and landing gear, wheels, hardware and photo- illustrated instruction manual

Requirements

• Radio: 4-5 channel

• Servos: 4-micro

• Y Harness: For aileron servos

• 12" (305mm) Extensions: Two

• 16" (406mm) Extensions: Two

• Motor: Rimfire brushless outrunner 42-50-800kV, GPMG4700

• Voltage Regulator: CSEM0005

• 45A ESC for Brushless Motors: GPMM1840

• Battery: LiPo 2100mAh, GPMP0618

• Cell Balancer: For LiPo battery, GPMM3160

• Battery Charger: LiPo compatible

• Propeller: 13x8E for sport setup

• 12x6E for 3D setup

Comments

• Following are the MonoKote colors used on this model and stock numbers for six foot rolls; White TOPQ0204 Sky Blue TOPQ0206 Sapphire Blue TOPQ0226 Royal Blue TOPQ0221 Medium Purple TOPQ0225