|
This is the ElectriFly TRITON2 Computerized Battery
Charger, Discharger and Cycler from Great Planes.
TRITON2 incorporates the following feature improvements over the TRITON;
Charge current increased to 7A (was 5A) Handles LiPo packs with up to 5
cells in series (was 4 cells max.) LCD now includes a Blue backlight for
easy viewing (TRITON LCD is not backlit) Input cord has banana plugs but
includes attachable large alligator clips (TRITON only had 'gator clips)
Rotating dial is raised and modified for easier control
 Features
-
Great for many applications
including Airplane and Heli Batteries, Tx and Rx batteries, Field Batteries
and more
-
Handles 1-24 cell NiCd/MH (1.2
- 28V) 1-5 cell Li-Ion or LiPo (3.6 or 3.7V cells) 6, 12, 24V Pb cell (2V
per cell)
-
Precision Zero DeltaV Peak
Detection with adjustable sensitivity for NiCd and NiMH batteries
-
"Constant Current / Constant
Voltage" charge method for Pb and Li-Ion/LiPo batteries
-
Fast Charge Thermal Cutoff
(GPMM3151 Thermal Probe available separately)
-
Top-Off Charge feature fully
charges NiMHs without overheating 0-250mA adjustable TRICKLE Charge current
(NiCd and NiMH only). 1-3A Adjustable Discharge Current
-
Adjustable Discharge Cutoff
Voltages for NiCd/MH, pre-set voltages for Pb and LiPo/Ion
-
Perform 1 to 10 cycles (NiCd/MH
only)
-
Recall data for 10 full cycles
-
Configure up to 10 batteries
in memory for instant, easy recall and charger setup
-
Displays Input and Output
Volts, Peak Volts, Avg Dsch Volts, Chg and Dsch Capacity, Currents and Time,
Error Messages (No Battery Connected, Open Circuit, and Reverse Polarity)
-
Audible sound cues aid in
programming and notification of function changes
-
Warning messages for Improper
Input Voltage, Poor Connections, Unsuitable Battery Condition, Reverse
Polarity on output
-
Safety features include
Cool-Off Time Delay, Maximum NiMH Charge Input, Fast Charge Safety Timer,
Current Overload and Reverse Polarity Protection
-
Built-in cooling fan for
better charge efficiency and extended charger life
-
Small and lightweight, with a
super-sturdy aluminum case for rugged durability
-
Full 1 year warranty
Specifications
1-24 NiCd/MH (1.2-28V)
1-5 Li-Ion or LiPo (3.6 or 3.7V cells)
6, 12, 24V Pb (2V per cell)
-
Fast Charge Current: .1-7A
linear NiCd/MH (.1A step, 90W max) 1C rating for LiPo/Li-Ion (90W max)
-
Fast Charge Termination:
Zero DeltaV Peak Detection NiCd/MH CC/CV for Pb and Li-Ion/LiPo
-
Optional Thermal Cutoff
for all Battery Types
-
Peak Sensitivity: NiCd
5-20mV, NiMH 3-15mV
-
Peak Delay at Start: 0-60
minutes
-
TRICKLE Charge Current:
0-250mA (NiCd/MH only)
-
Fast Charge Safety Timer:
0-990 minutes
-
NiMH Max. Charge Cap:
0-9900mAh
-
NiMH Top Off Charge:
0-1000mA
-
Thermal Cutoff: 50-150°F
(10-65°C), sensor optional
-
Discharge Current: .1-3A
-
Discharge Cutoff Voltage:
NiCd/MH .5-1.16V per cell (.9V/cell fixed during cycle)
-
Pb fixed at 1.8V per cell
-
Li-Ion/LiPo fixed at 2.8V
per cell
-
Cycle Count: 1-10 cycles (NiCd/MH
only)
-
Cycle Time Delay: 1-60
minutes
-
Battery Memories: 10
battery memories
-
Programming Controls:
Modified jog dial, 2 pushbuttons
-
Display Type: 2 x 16 LCD
with Blue backlight
-
Displayed Info: Input and
Output Volts, Peak Volts, Avg Dsch Volts, Chg and Dsch capacity,
Currents & Time, Data for 10 cycles, Errors
-
Audible Indicators: 10
Melodies. BUZZER OFF turns tones OFF.
-
Output Connectors: Banana
jacks
-
Case Material: Extruded
aluminum
-
Cooling System built-in
fan
-
Current Overload: solid
state
-
Case Size: 6.2 x 4 x 2 in
(157 x 102 x 51mm)
-
Weight: 16.4oz (466g)
Requires
HCAP0101 Futaba J Tx/Rx
Charge Leads NO 9VAP
HCAP0102 Futaba J Tx/Rx Charge Leads 9VAP ONLY
HCAP0105 JR Tx/Rx Charge Leads
HCAP0106 Hitec/Airtronics Z Tx/Rx Charge Leads
GPMM3148 Charge Lead BANANA/DEANS MALE U
GPMM3149 Charge Lead BANANA/DEANS MICRO
-
12V DC power from a power
supply or automotive battery.
-
Hobbico 12V Power Supply
(HCAP0250) for 1-18 cells
-
Rivergate 15A DC Bulldog
Power Supply (RHCP2015) for more than 18 cells
Package Contents
Comments
|
|
