Great Planes Extra 300SP .46-.81 Scale Aerobatic 3D EP/GP ARF GPMA1022
This is the radio controlled, electric or glow powered, almost ready to fly
Great Planes Extra 300SP Sport Airplane.
Features
-
Great Planes Extra 300SP .46-.81 Scale Aerobatic 3D EP/GP ARF GPMA1022
-
Construction: Balsa and ply
-
Wings: Two-piece with aluminum
joiner tube
-
Radio Compartment: Plywood
reinforced, accessible under canopy
-
Canopy: Single, clear plastic
(pilot figure shown in photos not included)
-
Aileron Control: Dual servo
-
Covering : Top Flite MonoKote
-
Cowl: Painted fiberglass
-
Landing Gear: Painted aluminum
0.12" (3.2mm) thick
-
Wheels: Foam, main 2.25"
(57mm) diameter, 1" (25.4mm) diameter tailwheel
-
Wheel Pants: Painted
fiberglass
-
Fuel Tank: 10.8oz (320cc)
-
Spinner: White plastic 2.5"
(63mm) diameter
-
Building Time: Ready to fly in
20-25 hours
-
Warranty: Great Planes Model
Manufacturing Company guarantees this kit free from defects in both
materials and workmanship at the date of purchase.
Specifications
-
Wingspan: 55" (1395mm)
-
Wing Area: 590 sq in (38.1 sq
dm)
-
Weight: 5.5 - 6.5lbs (2495 -
2950g)
-
Wing Loading: 21 -25 oz/sq ft
(65 - 77 g/sq dm)
-
Length: 53" (1345mm)
-
Airfoil: Semi symmetrical
-
Center of Gravity: 3-3/4"
(95mm) from leading edges of wing at the fuselage
-
Control Throws: Low Rate High
Rate 3D
-
Elevator: 3/8" (9.5mm) 6° 3/4"
(19mm) 11° 3" (76mm) 51°
-
Rudder: 2" (51mm) 16° 2-3/4"
(70mm) 22° 5" (127mm) 44°
-
Ailerons: 3/8" (9.5mm) 6° 3/4"
(19mm) 14° 1-3/8" (34.5mm) 26°
Contents
-
Great Planes Extra 300SP ARF
Sport Airplane with wheels, spinner, 2-pc engine mount, two decal sheets,
fuel tank, pushrods, all hardware and instruction manual
Requirements
-
Radio: 4-5 channel, 4-5 servos
-
Servos: Three standard ball
bearing (1-elevator, 2-ailerons)
-
One high torque ball bearing
(1-rudder)
-
One micro servo (1-throttle)
-
*this is the setup for sport
flying, micro servos can also be used for rudder, elevator and aileron
control
-
Servo Extensions: One 8"
(203mm)for throttle or ESC
-
One 12" (305mm) for rudder
servo if installing in rearward mounting position
-
Engine: .46-.55 cu in
(7.5-9cc) 2-stroke OR .52-.81 (8.5-13cc) 4- stroke OR Electric Motor:
RimFire .80 (50-55-500kV) with Silver Series 60A ESCmotor mount, ESC
programming card and 15x7E propeller, hook and loop adhesive strips, LiPo
battery and charger
Comments
|
|