Great Planes Glo-Bee Intellitach Digital Tachometer GPMP2500
This is a Multi-Blade (2,3,4-blade) Digital IntelliTach Tachometer.
*Additional Technical Information Will Be Added As It Becomes Available.**
Some Important Differences Added to the IntelliTach over the standard Tach are:
Improved optics and sensor.
A digital microprocessor that safeguards accuracy and provides
several nice functions like:
It can be set to automatically read the type of prop you use most,
whether it is a 2-, 3- or 4-blade style.
It "remembers" the last three readings, so you don't have to.
It shuts itself OFF after 5 minutes to save power.
More LCD display flips up to a comfortable reading angle.
Features
-
Great Planes Glo-Bee Intellitach Digital Tachometer GPMP2500
-
0 - 32,000 RPM operating range
readout is highly visible in large 1/2" (13mm), 5-digit LCD display.
-
Measures RPM for peak engine
performance up to 12" (305mm) from the propeller, and still gets readings
accurate to the nearest 10 rpm.
-
One-button operation to select
among 2-, 3-, and 4-bladed props with prop selection indicator on left side
of the display.
Specifications
Package Contents
Requirements
-
220 grit sandpaper (GPMR6185)
-
Wood glue (GPMR6160)
-
Scissors to cut foam tubing
-
CA glue (GPMR6001) to attach
foam tubing
-
Paint or stain if desired
Comments
-
Because of its sensitivity, the unit does not know whether it is
looking at a propeller or an incandescent or fluorescent light,
which typically strobes at 60 cycles per second or 3600 cycles
per minute. When set for 2-blades it will read 360 or 3600,
3-blades: 240 or 2400 and 4-blades: 180 or 1800. This is a quick
way to test the calibration.
In direct sunlight this will read zero when turned ON.
|
|
