Great Planes Goldberg Tiger 2 .40-.46 Kit GPMA0966
This is a radio controlled, glow powered, balsa and plywood
Carl Goldberg Tiger 2 .40 sport scale aerobatic airplane kit.
For beginner to intermediate modeler/fliers.
Features
-
Great Planes Goldberg Tiger 2 .40-.46 Kit GPMA0966
-
All Carl Goldberg kits include
fuselage alignment devices and most feature highly-refined interlocking lite
ply contruction methods.
-
Wings: One piece covered balsa
and plywood construction.
-
Radio compartment: Large built
in balsa and ply radio tray.
-
Landing gear: Wire main and
nose
-
Hardware: Complete hardware
included
-
Motor Mount: Included
adjustable engine mount
-
Warranty: Carl Goldgerg
Products guarantees this kit defect-free in both materials and workmanship
at the date of purchase.
Specifications
-
Wingspan: 61" (1549mm)
-
Wing Area: 680 sq in (4387sq
cm)
-
Weight: 4.75 - 5.25lb
-
Airfoil: Fully-symmetrical Low
Wing
-
Center of Gravity: 3½"-4-5/8"
(88.9-117mm) back from the wing's leading edge at the fuselage sides.
-
Control Throws- control throws
for rudder, elevator, and ailerons are set off of included gauge in
instruction manual.
Package Contents
-
All wood to construct airplane, pushrods, prebent wire aluminum main
landing gear, prebent nose wire, adjustable engine mount, horns,
decals, photo-illustrated instructions, full-size rolled plans.
Requirements
-
Engine: .35-.45 cu in (5.7-7.4
cc) 2-stroke OR .40-.50 cu in (6.5-8.2 cc) 4-stroke
-
Radio: 4-channel minimum
required
-
Servos: 4-standard servos
(1-ailerons, 1-elevator, 1-rudder, 1-throttle)
-
Covering: Two 6-foot rolls of
covering.
-
Misc. Items: Three 2¼" wheels,
2¼" spinner, 6-8oz fuel tank, 5/32" wheel collars, glow plug, ¼" foam rubber
padding, 3' medium fuel tubing, fuel filter, propeller, building and field
equipment.
Comments
|
|
