Great Planes Reactor .46-.70/EP 3D ARF GPMA1021
This is the radio controlled, glow powered, Almost-Ready-to-Fly,
Great Planes Reactor .46-.70/EP Sport Aerobatic Airplane.
For Intermediate to Advanced Modeler/Fliers.
Features
-
Great Planes Reactor .46-.70/EP 3D ARF GPMA1021
-
Construction: Laser cut balsa
and plywood, bolt pattern on firewall lines up for either a .46-.70 glow
engine or Brushless electric motor such as the ElectriFly 42-60-480 RimFire,
GPMG4715
-
Wings: 2 piece wing with
aluminum wing tube
-
Covering: Factory applied Top
Flite MonoKote, color scheme: Sapphire
-
Blue - TOPQ0226, Orange -
TOPQ0202, Transparent Yellow - TOPQ0303, Missile Red - TOPQ0201 and Black -
TOPQ0208
-
Radio Compartment: Plywood
reinforced, accessible under canopy
-
Glow Engine Mount: Great
Planes nylon adjustable (GPMG1061)
-
Fuel Tank: 10.8oz (tank
dimensions - 4.67" x 2.45" x 2.16")
-
Cowling: Pre-painted,
fiberglass construction
-
Wheel Pants: Pre-painted,
fiberglass construction
-
Canopy: Clear with factory
painted, Silver colored trim
-
Landing Gear: Pre-formed
aluminum, factory painted Yellow
-
Wheels: Two main 2" (51mm)
diameter and one 1" (25.4mm) tailwheel
-
Aileron Control: Dual servo
-
Building Time: Ready to fly in
only 5-6 hours.
-
Warranty: Great Planes Model
Manufacturing Company guarantees this kit free from defects in both
materials and workmanship at the date of purchase.
Specifications
-
Wingspan: 58" (1475mm)
-
Wing Area: 745 sq in (48.1 sq
dm)
-
Weight: 5.25 - 6.16lb (2410 -
2720g)
-
Wing Loading: 16 - 18oz/sq ft
(50 - 57g/sq dm)
-
Length: 59" (1500mm)
-
Airfoil: Fully Symmetrical
-
Center of Gravity: 4¾" (121mm)
Back from the leading edge of the bottom wing measured at the fuselage sides
-
Control Throws- High Rate Low
Rate
-
Elevator: Up & Down ¾" (19mm)
½" (12.7mm)
-
Rudder: Right to Left 1½"
(38mm) 1" (25.4mm)
-
Ailerons: Up & Down ¾" (19mm)
½" (12.7mm)
-
Flaps: Up & Down 1-3/8" (35mm)
1" (25.4mm)
Contents
-
Pre-built and covered wings, fuselage and tail assemblies, pushrods,
pre-bent main landing gear, .10" (2.5mm) diameter tailwheel wire,
2" foam main wheels, 1" foam tailwheel, 2.25" (57mm) diameter red
spinner, 10.8oz (320cc) fuel tank, wood servo trays and wing
joiners, hardware package and photo-illustrated instructions.
Requirements
-
Brushless Outrunner electric
motor GPMG4715
-
Electronic Speed Control
CSEM2008
-
NOTE: The recommended
propeller for use with the RimFire C42-60-480kV Brushless Outrunner Motor
power system is the APC 15x8E propeller, (APCQ4013). If installing a glow
engine, use the engine manufacturer's propeller recommendation.
-
Two 3200mAh LiPo batteries
(GPMP0623) connected in series, LiPo charger
-
Medium Brushless Motor Mount
(GPMG1255) OR
-
Glow Engine: .46-.51cu in
(7.8-8cc) 2-stroke OR .70 cu in (11.5cc) 4-stroke
-
Muffler: Sports-Style (Engine
mounts in an upright position)
-
Radio: 4-Channel
-
Servos: 5-Mini (2-Aileron,
1-Elevator, 1-Throttle(for glow only) 1-Rudder) 50oz of torque minimum,
digital servos highly recommended
-
6" (152mm) Servo Extensions:
Two, (HCAM2701)
-
12" (305mm) Servo Extensions:
Two, (HCAM2711)
-
24" (610mm) Servo Extensions:
Three (HCAM2721)
-
If your radio is not capable
of mixing you will also need 1 Y-harness HCAM2500 and 1 EMS Servo Reverser -
EMOM0027
-
Misc. Items: Glow plug, ¼"
foam rubber padding, medium fuel tubing, fuel filter, propeller, building
and field equipment.
Comments
|
|
