Great Planes Revolver .46-.70 GP/EP Sport Aerobatic ARF GPMA1018
This is the radio controlled, glow or electric powered, almost-ready-to-fly,
Great Planes Revolver Sport Aerobatic Airplane.
For Average Sport Pilots.
Features
-
Great Planes Revolver .46-.70 GP/EP Sport Aerobatic ARF GPMA1018
-
Construction: Balsa and ply
-
Wings: Two piece, foam core
balsa sheeted, aluminum wing tube
-
Cowl: Painted fiberglass
-
Covering: Factory applied Top
Flite MonoKote
-
Radio Compartment: Plywood
reinforced
-
Landing Gear: Pre-formed
composite
-
Wheels: Two main 2.71" (69mm)
diameter, one 1.18" (30mm) tail wheel
-
Wheel Pants: Painted and
constructed of fiberglass
-
Spinner: 3.25" (83mm) diameter
aluminum
-
Canopy: Vacuum formed, tinted
-
Aileron Control: Dual servo
-
Tail Group: Airfoil shaped
tail surfaces for better tracking
-
Fuel Tank: Approximately 16oz
(480cc)
-
Warranty: Great Planes Model
Manufacturing Company guarantees this kit free from defects in both
materials and workmanship at the date of purchase
Specifications
-
Wingspan: 59" (1500mm)
-
Wing Area: 563 sq in (36 sq
dm)
-
Flying Weight: 6 - 7lb (2720 -
3180g)
-
Wing Loading: 25 - 29 oz/sq ft
(76 - 88 g/sq dm)
-
Length: 48" (1220mm)
-
Airfoil: Semi symmetrical
-
Center of Gravity: 4-5/16"
(110mm) Back from the leading edge of the wing at the fuselage
-
Control Throws: Low Rate High
Rate
-
Elevator: Up & Down, 5/16"
(8mm) 1/2" (13mm)
-
Rudder: Right to Left, 1-3/8"
(35mm) 2-1/4" (57mm)
-
Ailerons: Up & Down, 1/4"
(6mm) 3/8" (10mm)
Contents
-
Pre-built and covered wings,
fuselage and tail assemblies, pushrods, pre-bent main landing gear, main and
tail wheels, wood servo trays, two wheel pants, fiberglass cowl, hardware
package,engine mount, pilot, fuel tank, photo-illustrated instructions and
decal sheet
Requirements
-
Engine: .46 -.55 cu in (7 -
9cc) two stroke OR .70 cu in (11.5cc) four stroke OR brushless motor (see
below)
-
Muffler: Pitts type (BISG4046)
-
Motor: Brushless type Great
Planes RimFire 42-60-800 (GPMG4725)
-
Motor Mount: Medium size,
(GPMG1255)
-
Electronic Speed Control: 80A
(GPMM1860)
-
Radio: 4-channel minimum
-
Servos: 4 standard size
coreless ball bearing for electric operation, one extra servo required for
throttle if using glow engine
-
6" (152mm) Servo Extension:
(HCAM2701)
-
Y-Harness: One for aileron
servos (HCAM2751)
-
Battery: Two 3200mAh 11.1V
Balanced LiPo (GPMP0623)
-
Equinox LiPo Cell Balancer:
(GPMM3160)
-
Adapter: Deans U Adapter 2 to
1 (GPMM3143)
-
Battery Charger: LiPo
compatible (GPMM3015)
-
Propeller: Glow, size
depending on engine selected
-
Electric, 11.5x5 (APCQ1055)
-
Misc. Items: Building and
field equipment
Comments
|
|
