Great Planes Silver Series 12A Brushless ESC 5V/1A BEC GPMM1810
This is the ElectriFly Silver Series 12 amp Brushless Electronic Speed Control.
Features
-
Great Planes Silver Series 12A Brushless ESC 5V/1A BEC GPMM1810
-
Compatible with NiCd, NiMH and
LiPo batteries
-
Auto-detects input volts and
sets Low-Voltage cutoff
-
8.5kHz switching frequency,
for good run-time and cool operation
-
Pre-installed Universal radio
connector* (see Comments below)
-
Pre-installed polarized micro
connector for battery
-
Pre-installed gold plated 2mm
female bullet connectors for motor
-
High powered switching BEC
(Battery Eliminator Circuitry) which handles 2 or 3 micro servos (4 if
adequate airflow is provided)
-
Full proportional forward and
smooth throttle response with ON/OFF brake
-
Safe Start System** (see
details in Comments below)
-
Thermal Protection stops motor
when maximum temperature 230°F is reached
Specifications
-
Length: 1.30" (33mm)
-
Width: .91" (23mm)
-
Height: .24" (6mm)
-
Weight: .49oz (14g)
-
Input Voltage: 6-12 cells NiCd/NiMH
2-4 cells LiPo (20V input w/o BEC)
-
Output Current: 12A continuous
maximum 15A surge maximum
-
Max Output Power: 150 watts
-
ON-resistance: .03 ohms
-
Operating frequency: 8.5kHz
fixed
-
BEC: 5V/1.5A
-
Low Voltage Cutoff: Battery
voltage x .67
-
Thermal Cutoff: 230°F (110°C)
-
Timing Angle: 12°
-
Brake: ON/OFF
Contents
Requirements
Comments
-
Typical Application: Great for small, lightweight, high performance airplanes
from flat-foams to built-up 3Ds. Great for Outrunner style
Brushless Motors, delivering 12A of continuous current
with a built-in Battery Eliminator Circuit which can
handle 1.5A. Simple to use and very affordable.
-
For mating motor connectors,
can use: GPMM3110
-
For mating battery connector,
can use: WSDM3007
-
*To use with "Old Airtronics"
Rx, requires adapter: AIRM4400
-
**Safe Start System: Move
throttle stick to full throttle position, then to "OFF" position, then
slowly advance throttle and motor will begin to run.
-
180 Day Warranty (USA & Canada
Only) |
|
