Hobbico Accu-Glo II Power Panel HCAP0306
This is the Hobbico Accu-Glo II Power Panel.
This panel powers Starters, Chargers, Fuel Pumps, and
Glow Starters and monitors condition of Glow Plugs.
This Power Panel comes with a hard plastic case or can be mounted to any Field Box with a standard sized cutout for a Power Panel.
Features
-
Hobbico Accu-Glo II Power Panel HCAP0306
-
Fuel Pump switch from original
Accu-Glo was replaced by separate color-coded push-buttons for "FILL" and
"EMPTY." Press once to Start, again to Stop
-
Four LEDs, 11V, 11.5V, 12V,
and 12.5V indicate Field Battery condition-an improvement from one light
that glowed either Green or
-
Red on original version
-
Glow Starter Charger keeps
unit fully charged at a constant 300-400mA rate
-
Automatic Glow Power
Management section tells when glow plug is fully charged and if plug
continuity is good
-
Adjustment dial allows
automatic glow heat customization to the model; once set the unit maintains
proper heat regardless of glow plug's condition
-
Two year limited warranty
Specifications
-
Input Voltage: 11-13V DC
-
Input Voltage Indicators: Four
LEDs
-
Starter Jacks-Output Voltage:
12V DC
-
Fuel Pump Controls: Yellow
"FILL" pushbutton; Red "EMPTY" pushbutton
-
Glow Heat Power Circuit:
Automatic heat adjustment
-
Glow Heat Status Indicators:
"HOT" and "COLD" LEDs
-
Glow Heat Continuity
Indicators: "GOOD" and "BAD" LEDs
-
Glow Starter Charger Current:
300-400mA constant current (not timed)
-
Glow Starter Output Jack: Glow
driver mounting lug with LED
-
Fuse: 7.5A spade type
-
Weight: 8.3oz (235g)
-
Dimensions: 6" x 3.7" (152 x
94mm)
Contents
-
One Hobbico Accu-Glo II Power
Panel with two alligator clips, two Black and two Red banana plugs, two
plastic plug covers, four M3x10 self-tapping screws to mount panel to Field
Box
Requirements
|
|
