Hobbico Expanded Scale Voltmeter HCAP0352

This is the Expanded Scale Voltmeter from Hobbico. This is ONLY designed for testing NiCd and nickel-metal hydride Transmitter and Receiver Batteries. It cannot be used to test capacity or voltage in glow plug NiCds or other field batteries below 4V.

Features

• Hobbico Expanded Scale Voltmeter HCAP0352

• Load tests 4.8V receiver and 9.6V transmitter NiCd and nickel-metal hydride battery packs

• Detects under-charged battery or bad cells in a pack

• Green = good, Red = recharge scale with bottom numbers representing receiver batteries and top numbers representing transmitter packs

• Two year limited warranty, U.S. and Canada only

Specifications

• Dimensions: 4 x 2.9 x 1.5" (101 x 73 x 39mm)

Contents

• Expanded Scale Voltmeter with instruction sheet and test leads (included test leads are probe type and not specific to any battery)

Requirements

• Leads depending on brand and type of radio;

• HCAP0101 TX/RX charge leads NO 9VAP Futaba J

• HCAP0102 TX/RX charge leads 9VAP only Futaba J

• HCAP0105 TX/RX charge leads JR

• HCAP0106 TX/RX charge leads Hitec/Airtronics Z

• HCAP0108 Two charge leads with alligator clips

• Modelers can make their own connectors by purchasing Banana Plugs (HCAP0310), 16 Gauge Wire, and their Radio Connector.

Comments

• Diode protected transmitter batteries cannot be tested through the transmitter charge jack. The battery must be removed from the transmitter to get an accurate voltage reading.