Hobbico FlyZone Piper J3 Cub EP RTF w/2.4GHz Radio HCAA2500
This is the electric powered, radio controlled ready-to-fly
FlyZone Piper J-3 Cub Airplane with the Tactic 2.4GHz Radio.
For beginning fliers 14 years of age and older.
Features
-
Hobbico FlyZone Piper J3 Cub EP RTF w/2.4GHz Radio HCAA2500
-
Construction: Foam
-
Wings: One-piece reinforced
-
Radio: Tactic TTX440 4-channel
2.4GHz
-
Electronic Speed Control:
-
Motor: 380 size
-
Landing Gear: Prebent .059"
(1.5mm) thick aluminum with prebent wire tailgear
-
Wheels: Foam, two main, 1.25"
(32mm) diameter, one .75" (19mm) tail wheel
-
Propeller: Two 7x3, one
installed and one spare
-
Battery: ElectriFly 7N-J
7-cell 8.4V 1100mAh NiMH (GPMP7700) with Red 2-pin connector
-
Charger: 12V DC Peak
(GPMM7700)
-
Cowl: ABS plastic
-
Warranty: Hobbico guarantees
this kit free from defects in both material and workmanship at the date of
purchase. This warranty does not cover any component parts damaged by use or
modification.
Specifications
-
Wingspan: 36" (915mm)
-
Weight: 19-21oz (540-600g)
-
Length: 26" (660mm)
-
Center of Gravity (CG):
Prebalanced at factory but should be confirmed using the following
procedure;
-
Place marks on bottom of wing
between 1½" (38mm) and 1¾" (44mm) back from the front of the wing next to
the fuselage.
-
Lift airplane with fingertips,
it should balance between the marks.
-
If it doesn't balance within
this area, weight must be added to nose or tail.
-
Control Throws-
-
Ailerons, Up and Down: 3/16"
(5mm)
-
Elevator, Up and Down: 1/2"
(13mm)
-
Rudder, Right and Left: 3/8mm
(9.5mm)
Contents
-
FlyZone Piper J-3 Cub Airplane with 380 size motor, two 7x3 props,
4-ch 2.4GHz radio w/3 micro servos, -ch receiver,
ElectriFly battery and charger, electronic speed control, and
illustrated instruction manual
Requirements
Comments
|
|
