Hobbico Hobbistar 60 Select RTF 71" HCAA18**
This is the radio controlled, glow powered, Ready To Fly
Hobbico Hobbistar 60 Select .60 Sport Scale all-wood airplane.
For Beginner Modeler/Fliers.
Features
-
Hobbico Hobbistar 60 Select RTF 71" HCAA18**
-
Construction: All balsa and
plywood
-
Wings: Two wing halves are
joined with a simple screw-together design 71" (1805mm) wingspan improves
stabilty and visibility. The wing mounts to the fuselage with rubber bands.
-
Covering: Factory applied
adhesive backed (not carried separately)
-
Colors are Blue and White with
Red and Orange stripes.
-
Engine: Pre-installed O.S. Max
.65 LA sport with muffler & glow plug
-
Radio: Futaba 6EXAP with four
servos
-
Radio Compartment: Plywood
reinforced
-
Landing Gear: Wire tricycle
style.
-
Wheels: Three 2.75" (70mm)
diameter foam
-
Aileron Control: one servo
pre-mounted in the wing
-
Building Time: Ready To Fly in
about a hour
-
Warranty Period: 90-days
covering defects or workmanship
Specifications
-
Wingspan: 71" (1805mm)
-
Wing Area: 888" (57 dm2)
-
Wing Chord: 12.5"
-
Weight: 7.5-8.5lbs (3.4-3.9kg)
-
Wing Loading: 20-22 oz/sq ft
(61-67 g/dm2)
-
Length: 55" (1400mm)
-
Width: 3-3/8" (85mm)
-
Airfoil: Semi-symmetrical,
high-wing
-
Center of Gravity: 3" Back
from the wing's leading edge at the fuselage sides.
-
Control Throws-
-
Ailerons: Up & Down 3/8"
(11mm)
-
Elevator: Up & Down 1/2"
(12.7mm)
-
Rudder: Right & Left 1"
(25.4mm)
-
Motor mount to firewall
screws- 4x20x.07mm
Contents
-
Pre-built and covered wings, fuselage and tail assemblies, pushrods,
O.S. Max .65 LA engine, muffler, glow plug, 6ch Futaba radio,
NiCd batteries, four ball bearing servos, 7 channel receiver
pre-bent 3/16" (5mm) main landing gear and nose gear wire, 2.75"
(70mm) wheels, metal one-piece engine mount with mounting straps,
14oz (420cc) fuel tank, 2¾" (69mm) White spinner, wood servo trays,
metal wing rod, hardware package and photo-illustrated instructions
Requirements
|
|
