This is a Super
Hot-Shot #2 Standard Glo-Starter with Battery Charger. This is used to heat glow
plugs to start glow-powered engines.
Features
-
Hobbico Hot-Shot 2 Super Sanyo
1500mah NiCd HCAP2528
-
Proven Twist and Lock
Connector ensures a secure, solid connection that won't come off, providing
safer, faster starts for your model.
-
Pre-Installed Genuine Sanyo
Sub-C battery cell
-
Included AC battery charger
with hex-shaped charge end recharges the glow starter in 10 hours. A
Red LED glows when unit is Charging.
-
Removable Red rubber socket
cap prevents shorting and any dirt or dust debris from entering into the the
shaft.
-
One Year Limited Warranty USA
and Canada only
Specifications
-
Sanyo Sub-C NiCd Battery:
1500mAh, 1.2V
-
AC Charger- Input: 110-120V AC
60Hz (US Standard) Output: 1.25V DC 150mA
-
Hot Shot- Overall
Length: 4-5/8" (118mm) Shaft Length: 2-1/4" (57mm)
-
Diameter: 1-5/16" (33mm)
Package Contents
-
One Super Hot Shot 2 Standard
Glo-Starter w/Red rubber protective cap
-
One Hot Shot #2 Glo-Starter
Battery Charger
-
One Instruction/Header Card
Comments
-
How to use: To lock onto your
engine's glow plug, place the end of the Hot Shot 2 over the plug and push
down. Twist the Super Hot Shot #2 clockwise to lock into place.
-
Charging: Before using,
initial Charge should be 12 to 14 hours
-
Subsequent charging time is
approximately 10 hours
-
For Hot Shot #2 Standard
version use HCAP2520
-
For Hot Shot #2 Long version
use HCAP2522
-
Note:*** The charger
originally packaged with this Glo-Starter has a 150mAh Charge rate which
requires a long time to Charge the large mAh battery. The modeler Charges
the battery initially for 24 hours. After that, 12-hour Charges each. If
modeler is a regular flier, Charge twice a month for 24 hours. ***
|
|
