Hobbico VoltWatch 12V Field Power HCAP0331

This is the Hobbico VoltWatch Battery Monitor for 12V Field Batteries

Features

• Hobbico VoltWatch 12V Field Power HCAP0331

• A quick way to check Field Battery levels

• Mounts on outside of Field Box with included double sided tape

• Push button operation. POWER button must be pushed to activate LEDs

• Red, Amber, and Green LEDs glow to show voltage range from 11-13V

• Red = 11V or less

• First Amber = 11-11.4V

• Second Amber = 11.4-11.7V

• First Green = 11.7-12.1V

• Second Green = 12.1-12.4V

• Third Green = 12.4-12.8V

• Final Green = 12.8-13.0V

• Draws amazingly low current - less than 30mA

• Wires are pre-stripped and tinned for easy soldering to battery*

• Two year warranty

Specifications

• Length: 1.6" (41mm)

• Width: .6" (15.6mm)

• Height: .13" (3mm)

• Weight: .35oz (10g)

• Current Draw: less than 30mA

• Battery lead wire length: 9.5" (241mm) approximately

Contents

• One VoltWatch Battery Monitor for 12V Field Batteries

• One 1x1.5" piece of double-sided servo tape

Requirements

• Soldering leads to battery terminals*

• Attaching to Field Box with double-sided servo tape

Comments

• Important! Unit may fail if input leads are connected in reverse and the button is pushed. Be certain to observe proper polarity when plugging in leads.

• *Instructions suggest soldering directly to the battery terminals.