HPI 104240 RTR Savage Flux w/2.4
This is the brushless electric powered, 2.4GHz radio controlled, ready to run
1/8 scale HPI Savage Flux HP Monster Truck.
Features
-
HPI 104240 RTR Savage Flux w/2.4
-
Chassis: Rigid 6061-series
aluminum TVP (twin vertical plate) 0.098" (2.5mm) thick, extra low CG for
high degree of control and cornering ability, included wheelie bar, twin
battery boxes hold a variety of battery types
-
Drive: Four wheel shaft
-
Brushless Motor: HPI Flux Tork
2200Kv with machined cooling fins, 5mm shaft, handles up to 25V of power,
held in place with two machined 8mm billet aluminum clamps and 0.12" (3mm)
thick 7075 billet aluminum motor mount
-
Radio: HPI TF-20U 2.4GHz with
steering and throttle trim and reverse and dual rate adjustment, transmitter
does not have charge jack
-
Electronic Speed Control: HPI
Flex Blur with reverse, programmable, integrated cooling fan and up to 6S
LiPo battery handling capability
-
Transmission: All metal gears
running on rubber-sealed ball bearings
-
Differential: Equipped with
machined super heavy duty bevel gears, upgradeable with all nitro Savage
option parts
-
Spur Gear: Machined steel, 44
tooth
-
Suspension: Uprights designed
for the larger tires and weight of the Savage XLWheels: HPI Warlock, chrome
finish, width: 2.2" (56mm), 3.3" (83mm) diameter
-
Tires: GT-2 on/off-road with
blocky tread pattern and heavy-duty sidewall teeth, 6.3" (160mm) diameter,
3.4" (86mm) wide
-
Shocks: Big Bore nylon bodied,
oil filled
-
Caster: Adjustable front and
rear toe-in, caster/toe-in refers to the angle of the front suspension when
viewed from the side of the car
-
Camber: Adjustable, camber
refers to the angle of the tops of the tires from vertical when viewed from
front or behind vehicle
-
Body: Trimmed and painted GT-2
Specifications
-
Vehicle-
-
Length: 21" (533mm)
-
Width: 16.8" (427mm)
-
Height: 10" (254mm)
-
Front and Rear Track: 16"
(406mm) outer edges of tires, side to side
-
Front and Rear Tread: 13.1"
(332.5mm) center of tires, side to side
-
Wheelbase: 13.6" (345mm)
-
Body-
-
Length: 19.2" (487mm)
-
Width: 8.5" (216mm)
-
Height: 5" (127mm)
Package Contents
-
Assembled 1/8 scale HPI Savage Flux HP Monster Truck with Flux Tork
2200 brushless motor, Flux Blur ESC, HPI 2.4GHz radio system, SF-5
high torque metal gear steering servo, painted & trimmed body,
wheelie bar, instruction manual and HPI RC Cars DVD
Requirements
-
AA Batteries: Six for
transmitter
-
Batteries: Two NiMH (up to
8-cell flat or stick packs) with Deans connectors, or 2S or 3S LiPo hard
case battery packs, 25C minimum (both batteries must be the same type,
voltage and capacity)
-
Battery Charger: Depending on
type of batteries selected
-
Building and track equipment
Comments
|
|
