HPI 104246 Savage XL 5.9 Nitro RC Monster Truck RTR w/2.4 Radio
This is the 2.4GHz radio controlled, glow powered, ready-to-run
HPI Savage XL 5.9 Monster Truck.
Features
-
HPI 104246 Savage XL 5.9 Nitro RC Monster Truck RTR w/2.4 Radio
-
Chassis: Rigid 6061-series
aluminum TVP (twin vertical plate) 0.12" (3mm) thick
-
Drive: Four wheel shaft driven
-
Engine: HPI Nitro Star K5.9
.36 cu in (5.9cc), ABC cylinder and piston construction, three needle
composite bodied slide valve carburetor with 9.5mm inlet, dual stage air
filter, starts with included HPI Roto Start 2 shaft drive electric starter,
one-piece engine mount and 0.12" (3mm) mounting plate
-
Exhaust: Polished aluminum
two-chamber tuned pipe and polished aluminum manifold
-
Radio: HPI TF-20U 2.4GHz with
steering and throttle trim and reverse and dual rate adjustment, transmitter
does not have charge jack
-
Servos: SF-1 standard servo
for throttle, SF-5 high torque servo with 8.9kg/cm2 at 6 volts
-
Wheels: Chrome plated 2.2"
(56mm) wide with 17mm aluminum hex hubs, 3.4" (87mm) diameter
-
Tires: HPI Terra Pin with
spike pattern for grass and loose dirt and center chevron pattern for
directional stability, 7" (178mm) diameter, 3.35" (85mm) wide
-
Shocks: Eight long-stroke
oil-filled
-
Fuel Tank: 5.4oz (160cc), flip
top cap
-
Clutch: Three shoe aluminum
-
Clutch Bell: Heavy duty steel
construction, vented 16 tooth
-
Body: Painted and trimmed
0.60" (1.5mm) thick polycarbonate GT Gigante monster truck, body color is
blue or orange see COMMENTS
-
Suspension: Double wishbone
with lightweight suspension arms
-
Caster: Adjustable front and
rear toe-in, caster/toe-in refers to the angle of the front suspension when
viewed from the side of the car
-
Camber: Adjustable, camber
refers to the angle of the tops of the tires from vertical when viewed from
front or behind vehicle
-
Brake: Machined steel hub and
dual red fiberglass brake discs
-
Transmission: Three-speed with
metal gears and adjustable shift point
-
Differentials: Alloy cases
with with machined steel rings and pinion bevel gears with new larger
machined steel diff outdrives and axles
-
Slipper Clutch: Heavy duty
dual slipper plates and shock absorbing rubber pad
-
Spur Gear: Machined steel 52
tooth
-
Ball Bearings: Full set,
rubber sealed
-
Steering: Bell crank with
cam-type servo saver steering arms
-
Warranty Period: Two year
limited, valid only in the US, Canada and South America
Specifications
-
Vehicle-
-
Length: 23.8" (580mm)
-
Width: 17.5" (445mm)
-
Height: 10.6" (270mm)
-
Wheelbase: 15.74" (400mm)
wheels on-center front-to-rear
-
Suspension Travel: 6" (152mm)
-
Body-
-
Length: 20.7" (527mm)
-
Width: 7.7" (196mm) at rear
wheels, widest point
-
Width: 7.1" (180mm) ahead of
fr wheels, narrowest point
-
Height: 5.3" (136mm)
-
Thickness: 0.60" (15.2mm)
Package Contents
-
HPI Savage XL 5.9 Monster Truck with HPI Nitro Star K5.9 engine,
Roto Start electric starter, glow plug, air filter, 2.4GHz radio,
standard throttle servo, high-torque steering servo, hump
receiver pack, wall charger, painted and trimmed body, instruction
manual
Requirements
-
AA Batteries: Six for
transmitter
-
Fuel: Car blend with 20% nitro
content
-
Battery: 7.2V stick pack with
standard connector for Roto Start
-
Battery Charger: Timed or peak
for Roto Start battery
-
Glow starter, fuel bottle and
track equipment
Comments
|
|
