HPI 105878 E-Firestorm 10T Flux RTR

This is the 1/10 scale 2.4GHz radio controlled, electric powered, ready-to-run HPI E-Firestorm 10T Flux Stadium Truck.

Many HPI Firestorm 10 option parts fit this vehicle.

Features

• HPI 105878 E-Firestorm 10T Flux RTR

• Chassis: Composite nylon tub 3mm (0.12") thick

• Drive: Rear wheel with steel dogbones and axles

• Motor: HPI Flux Vektor 4800kV brushless with Neodymium magnet, oversized sealed ball bearings, four pole rotor for more torque and triple insulated windings for long life

• Electronic Speed Control: HPI Flux Vapor, waterproof, handles 3S LiPo battery, Linear Torque Braking for better control on corner entry sensorless tecnology and cross cut aluminum heat sink

• Radio: 2.4GHz with high-torque steering servo, failsafe and waterproof receiver box

• Battery: 8.4V Plazma 3300mAh NiMH with Deans female ultra plug

• Battery Charger: AC wall type with Standard to Deans adapter

• Transmitter Batteries: Eight AA

• Wheels: Chrome finish Split 5 2.0" (51mm) wide, 2.2" (55mm) diameter with 12mm aluminum hex adapters compatible with all HPI 1/10 scale vehicles

• Front Tires: Front Line 4" (102mm) diameter, 2.1" (53mm) wide

• Rear Tires: Ground Assault 4" (102mm) diameter, 2.1" (53mm) wide

• Transmission: Low profile 2.6:1 ratio with all metal gears and dual pad slipper clutch

• Shocks: Four silicone oil-filled composite body

• Suspension: Assembled with captured hinge pins, geometry and components from Firestorm 10

• Differential: Sealed planetary type

• Spur Gear: 87 tooth 48 pitch

• Pinion Gear: 19 tooth 48 pitch

• Body: Pre-painted and trimmed DSX-2

• Caster: Adjustable front and rear toe-in, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car

• Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle with dual pad slipper clutch

• Steering: Bell crank with cam-type servo saver steering arms laydown steering servo position

• Warranty Period: Two year limited

Specifications

•   Vehicle-

• Length: 16.7" (425mm)

• Width: 12.8" (325mm)

• Height: 5.8" (147mm) at rear wing

• Wheelbase: 11.4" (289mm) adjustable

•   Body-

• Length: 16" (406mm)

• Width: 6.5" (166mm) ahead of rear wheels (widest point)

• (141mm) ahead of front wheels (narrowest point)

• Height: 3.8" (96mm)

• Thickness: 0.020" (0.5mm)

Contents

• HPI Firestorm 10T Flux Stadium Truck, brushless motor, ESC, 8.4V 3300mAh battery, wall charger, six AA batteries, 2.4GHz radio with steering servo, Front Line front tires, Ground Assault rear tires, DSX-2 painted body and instruction manual

Requirements

• Building and track equipment

Comments

• For Replacement Ball Bearings use:

•  Qty. Size Location Qty. Bearing Set

•   2 10x15mm Transmission 1 DTXC1595

•   4 5x10mm Transmission 2 DTXC1535

•   2 5x10mm Front Hubs 1 DTXC1535

•   2 5x10mm Rear Hubs 1 DTXC1535

• The E-Firestorm 10T Flux Stadium Truck is available in the following body color schemes;

•   Orange & Black, HPID78NL

•   Yellow & Black, HPID78YL